User manual YAMAHA AW16G

[. . . ] Owner's Manual Keep This Manual For Future Reference. E FCC INFORMATION (U. S. A. ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. [. . . ] When importing from an audio CD/CD-Extra 1 2 3 1 2 Switch the internal settings of the AW16G to enable digital recording. For details on digital recording settings, refer to page 160. Insert a CD into the CD-RW drive. You can load audio data (CD-DA) or WAV files from the following types of media. Audio data (CD-DA) · Audio CD · CD-Extra (only the first session of CD-DA) · Mixed Mode CD (only CD-DA data of the second and later tracks) WAV files · ISO9660 Level 1 format CD-ROM, CD-R, CDRW* · Mixed Mode CD * The directory name and file name cannot use characters other than uppercase alphanumeric characters and the "_" (underscore) character. If you use the AW16G to export WAV files onto CDR/RW media, the data will be in ISO9660 Level 1 format, but please be aware of this restriction if you use a computer to create WAV files. 5 1 From CD TRACK 6 7 4 Specifies the number (01­99) of the audio track that will be imported from the source CD. B From Start Specifies the starting location of the data that will be imported, in units of minutes/seconds/frames (1/ 75th of a second). C From End Specifies the ending location of the data that will be imported, in units of minutes/seconds/frames (1/ 75th of a second). Tip! The "frames" here are the smallest unit of time used by a CD track. Do not confuse them with the frames used in MTC or SMPTE. 3 In the Quick Loop Sampler section, repeatedly press the [SAMPLE EDIT] key or hold down the [SAMPLE EDIT] key and use the CURSOR [ ]/[ ] keys to access the CD IMPORT page of the SAMPLE screen. D LISTEN button If you move the cursor to this button and press the [ENTER] key, the specified region of the currently selected CD track will be played back repeatedly. E To PAD Selects the pad number (1­4) to which the audio material will be imported. F To BANK 4 Selects the sample bank (A­D) to which the audio material will be imported. Make sure that the cursor is located at the READ CD INFO button, and press the [ENTER] key. The display will indicate "Read CD info. . . ", and the AW16G will begin reading the CD that is inserted in the CD-RW drive. Depending on the source from which data is read, the screen will change as follows. G To NAME Indicates the name of the sample that is currently assigned to the import-destination sample bank. If nothing is assigned, this will indicate [-NO REC-]. This field is only for display, and cannot be edited. 112 When importing from a WAV file 2 1 3 · When you move the cursor to the LISTEN button and press the [ENTER] key, there will be a slight interval of time before you hear the sound, since the data is being read from CD. 5 5 1 From WAV File Specifies the WAV file that will be imported. If the media contains folders (directories), move to the folder that contains the WAV file you want to import, and then specify the desired WAV file. The following icons will be displayed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indicates that a folder in the same level is selected. Indicates that the folder for the next higher level is selected. If you are importing a WAV file, move the cursor to the From WAVE file field, and turn the [DATA/JOG] dial to select the WAV file that you want to import. To move to a lower-level folder, display the ( ) icon in this area, move the cursor to the ENTER button in the screen, and press the [ENTER] key. To move to the folder above, display the ( ) in this area, move the cursor to the UP button in the screen, and press the [ENTER] key. 6 7 4 6 7 If you are importing from an audio CD or CD-Extra, use the From Start/From End fields to specify the region that you want to import. Use the To PAD and To BANK fields to specify the pad/sample bank into which the data will be imported. B Mono/Stereo Indicates whether the WAV file selected for importing is monaural (M) or stereo (S). This field is only for display, and cannot be edited. Note If the import destination already contains data, the existing sample will be overwritten by the newly imported sample. Be careful that you do not accidentally erase a sample that you want to keep. C Size Indicates the size (length in msec units) of the WAV file selected for importing. This field is only for display, and cannot be edited. 8 When you have finished specifying the data to be imported, move the cursor to the EXEC button and press the [ENTER] key. A popup window will appear, asking you to confirm the operation. D LISTEN/ENTER/UP buttons The name and function of the button displayed here will depend on the item that you select for the From WAV File parameter. If WAV file ( ) is selected The LISTEN button will be displayed, allowing you to hear the WAV file repeatedly. If a folder in the same level is selected The ENTER button will be displayed, allowing you to move into that folder. If the next higher folder ( ) is selected The UP button will be displayed, allowing you to move to the folder above. 9 To execute the import, move the cursor to the OK button and press the [ENTER] key. Importing will begin. If you decide to cancel the import, move the cursor to the CANCEL button and press the [ENTER] key. 11 Quick loop sampler Tip! · When you import from CD-DA, a name of "PAD_x_y" (x= pad number, y= sample bank) will automatically be assigned to the sample. You are free to change this name later ( p. · When you import a WAV file, the first eight characters (not including the extension) of that filename will be assigned as the name of the sample. [. . . ] Dynamics Library Bulk Dump Request Format STATUS ID No. 11110000 01000011 0010nnnn 01111110 01001100 01001101 00100000 00100000 00111000 01000011 00110111 00110101 01011001 0mmmmmmm 11110111 F0 43 2n 7E 4C 4D 20 20 38 43 37 35 59 mm F7 System Exclusive Message Manufacturer's ID (YAMAHA) n=0-15(MIDI Channel No. 1-16) Universal Bulk Dump 'L' 'M' '' '' '8' 'C' '7' '5' 'Y' m= 0-127 (Dynamics Library No. 1-128) End Of Exclusive DATA NAME DATA 0ddddddd ds Equalizer Library Memory(48*2bytes) :: CHECK SUM EOX 0ddddddd de 0eeeeeee ee ee=(INVERT('L'+'M'+. . . +ds+. . . +de)+1) AND 7Fh 11110111 F7 End Of Exclusive DATA NAME EOX All data is divided into 4 bit units. 5. 13. 2. 8. Equalizer Library Bulk Dump Request Format STATUS ID No. 11110000 01000011 0010nnnn 01111110 01001100 01001101 00100000 00100000 00111000 01000011 00110111 00110101 01010001 0mmmmmmm 11110111 F0 43 2n 7E 4C 4D 20 20 38 43 37 35 51 mm F7 System Exclusive Message Manufacturer's ID (YAMAHA) n=0-15(MIDI Channel No. 1-16) Universal Bulk Dump 'L' 'M' '' '' '8' 'C' '7' '5' 'Q' m= 0-127 (Equalizer Library No. 1-128) End Of Exclusive 5. 13. 2. 11. [. . . ]