User manual YAMAHA B45E

[. . . ] For the formatting procedure, refer to “CL5/CL3/CL1 Reference Manual. ” For formatting in a computer, refer to documentations supplied with the computer or its OS. ● The CL series firmware Download the latest firmware from the following URL. http://www. yamahaproaudio. com/downloads/ Ultimate / Professional / Home Premium Professional SP2 or later / Home Edition SP2 or later Intel Pentium 1. 2GHz or Intel Celeron 1. 7GHz or higher ● The Dante firmware update program Download the latest program from the following URL. http://www. yamahaproaudio. com/downloads/ CL5/CL3/CL1Firmware Update Guide 2 ■ Update procedure sequence Update each firmware component in the following sequence. If you plan to update multiple CL series units, repeat the procedure described in “Update” for each unit in sequence. Preparing for update Install the Dante Firmware Update Manager TCP/IP settings of computer Update Updating the CL series firmware Updating the Dante firmware CL5/CL3/CL1Firmware Update Guide 3 ■Install the Dante Firmware Update Manager Before you update the Dante firmware, you must install the Dante Firmware Update Manager. [. . . ] The Dante firmware does not operate normally if its path contains any multi-byte character (including Japanese characters). If you use a directory name containing any multi-byte character in your computer, store the firmware update files in a directory that consists only of ASCII characters (e. g. C:¥temp). NOTE ・For Windows 7, the “Windows Security” dialog box may appear. In such case, click [Install this driver software anyway]. ・ You may be prompted to restart the computer after the installation is complete. Before proceeding to update, restart the computer. ・In the middle of installation of the Dante Firmware Update Manager, you may be prompted to install Bonjour. In such case, download the Bonjour installer from the URL presented by the installer and install it. CL5/CL3/CL1Firmware Update Guide 4 ■ TCP/IP settings of computer Before you update the Dante firmware, you must modify your computer’s TCP/IP settings. After the firmware update procedure is complete, return the TCP/IP settings to their original settings. Windows 7 1. Select [Start]→[Control Panel], then click or double-click [Network and Sharing Center] or [View network status and tasks]. The “Network and Sharing Center” is displayed. 2. Click [Manage network connection] or [Change Adapter settings] from the “Tasks” list located in the left side of “Network and Sharing Center” window, then double-click [Local Area Connection]. The "Local Area Connection Status" dialog box will be displayed. NOTE ・The "User Account Control" dialog box may appear. ・If the "Local Area Connection properties" dialog box appears, skip ahead to step 4. 3. Click [Properties]. The “Local Area Connection properties” dialog box will be displayed. NOTE ・The "User Account Control" dialog box may appear. Click [Continue] or [Yes]. 4. Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties]. The "Internet Protocol Version 4(TCP/IPv4) Protocol" dialog box will be displayed. 5. Click [Obtain an IP address automatically]. 6. Click [OK]. CL5/CL3/CL1Firmware Update Guide 5 ・Windows XP 1. Select [Start] → [Control Panel]. The "Control Panel" is displayed. 2. xxx and yyy represent the firmware version number. NOTE ・The Dante firmware does not operate normally if its path contains any multi-byte character (including Japanese characters). If you use a directory name containing any multi-byte character in your computer, store the firmware update files in a directory that consists only of ASCII characters (e. g. C:¥temp). If update files other than CL are applied, the device becomes inoperative. In such case, you need to revert the device firmware to the original version by using a failsafe recovery. Be sure to ensure compatibility of the update files with CL. CL5/CL3/CL1Firmware Update Guide 9 5. Click [Next]. NOTE ・ “upgrade_tool. exe” may be blocked by the Windows Firewall. For Windows XP, click [Unblock] in such case. For Windows 7, select the [Private Network] checkbox and click [Allow access]. 6. Check the CL to update. Check the version of the update files and the version number indicated in the CL line. NOTE ・If it is not indicated, click [Refresh]. It is still not indicated after that, the computer and the CL is not connected properly. Check that the cable does not come off or is not disconnected, TCP/IP is properly configured, and the CL is activated. 7. Click [Start]. The update operation will begin. “Updating(n/m)” appears in the Status field during updating. “Done” is displayed once update is completed. [. . . ] If update fails due to disconnection of the power cable during the update, or due to other reasons, the device may become inoperative. NOTE ・If update is not completed after 5 minutes, or update failure indication appears, click X at the upper right corner of Dante Firmware Update Manager to exit the program without turning the CL power off, and restart the procedure from the step 4. If update still fails, follow the instructions stated in “About Failsafe Mode” to perform the recovery processing. 8. Restart the CL series. The firmware update is now complete. CL5/CL3/CL1Firmware Update Guide 10 ■About Failsafe Mode Though software must be loaded from a flash memory drive during operations to use the Dante module integrated in the CL, data in a flash memory drive may be crashed as with the other storage devices. In many cases, such data crash is caused by turning the CL power off during firmware upgrading as with the other devices using flash memory drives. The Dante module have a specially protected flash drive section in order for recovery from such condition. [. . . ]