User manual YAMAHA BK2E

[. . . ] Do not subject the tuner to strong physical shock or vibration. Do not use excessive force on any of the controls. Never use solvents such as benzene or thinner to clean the tuner. [. . . ] After reading the owner's manual, keep it in a safe place for future reference. Never dispose of used batteries by burning them. Also make sure to keep batteries away from children. COMPONENTS w Tuning guide e Built-in microphone r Power/Mode switch q Pitch indicator t Input jack TUNING PROCEDURES The tuner will automatically select the closest note name (string name) to the pitch of the plucked string. 1. For electric guitars/basses, connect the guitar cable to the Input jack t. * The built-in microphone e will not operate when a cable is plugged into the Input jack t. Slide the Power/Mode switch r to select the type of instrument (GUITAR or BASS) you want to tune. (The center green LED of Tuning guide w will flash. ) 3. To tune an acoustic guitar, place the tuner's built-in microphone e as close as possible to the guitar's sound hole. (Do not pluck more than one string at a time. ) · First, adjust the string so that the appropriate string name pitch indicator q lights. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. [. . . ] This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit "OFF" and "ON", please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. [. . . ]