User manual YAMAHA BK5BE

[. . . ] 127) A two-space Premium Rack processor (U76) can be mounted only in an odd-numbered rack. Addition of PATCHING indicator (Reference Manual, p. 136) A PATCHING indicator has been added to the Function Access Area. The PATCHING indicator appears when a DANTE INPUT PATCH setting or an I/O RACK OUTPUT PATCH setting is changed. While this indicator is lit, a DANTE INPUT PATCH setting or an I/O RACK OUTPUT PATCH setting cannot be changed continuously. Using a Premium Rack with the MIDI PROGRAM CHANGE popup window (Reference Manual, p. [. . . ] While this indicator is lit, a DANTE INPUT PATCH setting or an I/O RACK OUTPUT PATCH setting cannot be changed continuously. Using a Premium Rack with the MIDI PROGRAM CHANGE popup window (Reference Manual, p. 148) The procedure for using a Premium Rack has changed for the MIDI PROGRAM CHANGE popup window. If you have selected PREMIUM RACK in the TYPE field, you can select the rack number in the DESTINATION field and the library number in the LIBRARY NUMBER field. The DESTINATION field and LIBRARY NAME field also appear when you select SCENE in the TYPE field. Addition of options when loading a settings file (Reference Manual, p. 170) In the SAVE/LOAD popup window, you can select whether or not to load Dante settings while loading a settings file. WITH DANTE SETUP AND I/O RACK button When you turn off the button, settings related to DANTE SETUP and the I/O rack are excluded when the settings file is loaded. NOTE The SECONDARY PORT and CONSOLE ID settings in the DANTE SETUP popup window are not changed, even if the WITH DANTE SETUP AND I/O RACK button is on. Display of version information (Reference Manual, p. 184) Version information has been added to the SETUP screen, which is accessed by pressing the SETUP button in the Function Access Area. The following items appear. BATTERY: Status of the internal battery (Normally YES; LOW or NO when the battery runs down) POWER SUPPLY: Whether the currently running power supply is internal (INT) or PW800 (EXT) MAIN: Version number of main CPU SUB: Version number of sub CPU DANTE: Version number of DANTE module Operation when changing NETWORK settings (Reference Manual, p. 191) After changing settings in the NETWORK popup window, which is accessed by pressing the SETUP button in the Function Access Area, then pressing the NETWORK button, the CL series must be restarted. Wait about 1 minute, and then turn on the CL series. NOTE If the CL series cannot be turned off, unplug the Ethernet cable from the Dante connector on the I/O rack, turn off the I/O rack while it is disconnected from the network, then turn it on again, and then wait about 1 minute before connecting the Ethernet cable. I/O rack settings for scene recall (Reference Manual, p. 198) For each CL series unit, you can specify which I/O rack the information saved on the CL series will be applied to when the CL series is started up and when a scene is recalled. When there are multiple CL series units, specify the settings so that a scene is recalled to an I/O rack from only one CL series. In the Function Access Area, press the SETUP button. Press the DANTE SETUP button to access the DANTE SETUP popup window. 3. In the DEVICE TYPE list, set the DEVICE TYPE for the I/O rack that you want recalled from the currently selected CL series to an I/O rack indicated by "(w/RECALL)". In the same way, for other CL series units, specify the DEVICE TYPE setting to set whether or not a scene is recalled to an I/O rack. [. . . ] In the DEVICE TYPE list, set the DEVICE TYPE for the I/O rack that you want recalled from the currently selected CL series to an I/O rack indicated by "(w/RECALL)". In the same way, for other CL series units, specify the DEVICE TYPE setting to set whether or not a scene is recalled to an I/O rack. NOTE General network settings (BIT/LATENCY/W. [. . . ]