User manual YAMAHA C-2A

[. . . ] Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] The sound field is made to be similar to that of the newest movie theaters, so the reverberations of the sound field itself are restrained as much as possible. This program is for reproducing sounds from 70-mm and multichannel soundtrack films, and is characterized by soft and extensive sound field. The presence sound field is relatively narrow. It spatially spreads all around and toward the screen, restraining the echo effect of conversations without losing clarity. THX processing for any multi-channel sources. THX processing for Dolby Digital and Dolby Digital EX sources. This program is available only when surround back L/R speakers are connected to this unit and when the input source contains surround back channel signals. Standard 5. 1 channel processing for Dolby Digital sources. Sources STEREO: 2ch Stereo MOVIE THEATER: Spectacle MOVIE THEATER: Sci-Fi SOUND FIELD PROGRAMS MULTI 2-CH MOVIE THEATER: Adventure MOVIE THEATER: General THX Cinema THX Surr. ENHANCED CINEMA DSP enhanced processing for Dolby Digital sources. MULTI Standard 6. 1/7. 1 channel processing for Dolby Digital sources. CINEMA DSP enhanced 6. 1/7. 1 channel processing for Dolby Digital sources. English DOLBY D EX: SUR. STANDARD Standard 6. 1 channel processing for Dolby Digital sources. 41 SOUND FIELD PROGRAM DESCRIPTIONS Program Features CINEMA DSP enhanced 6. 1 channel processing (Dolby Digital EX) for Dolby Digital sources. Standard 5. 1 channel processing for DTS and 96kHz/24-bit DTS sources. Sources DOLBY D EX: SUR. Display off POWER TV POWER AV AMP 1 2 Select a source and start playback on the source component. Press SLEEP repeatedly to SLEEP set the amount of time. Each time you press SLEEP, the front panel display changes as shown below. The SLEEP indicator flashes while switching the amount of time for sleep timer. SLEEP 120 min. DSP LEVEL;;;;0dB INIT DLY;;;;30ms ROOM SIZE;;;;1. 0 LIVENESS;;;;;;;5 P02 CONCERT HALL SLEEP OFF SLEEP 30 min. SLEEP 60 min. Full display Short display V­AUX DVR/VCR2 VCR 1 CBL/SAT SLEEP DTV DVD MD/TAPE HiFi DSP CD­R CD TUNER PHONO VOLUME Notes · The OSD signal is not output to the REC OUT jack, and will not be recorded. · You can set the OSD to turn on (gray background) or off when a video source is not being reproduced (or the source component is turned off) by using "Display set" (see page 56). SP A SLEEP 120min L R The "SLEEP" indicator lights up on the front panel display after the sleep timer has been set. V­AUX DVR/VCR2 VCR 1 CBL/SAT SLEEP DTV DVD MD/TAPE HiFi DSP CD­R CD TUNER PHONO VOLUME SP A CONCERT HALL L R 44 ADVANCED OPERATIONS Canceling the sleep timer Press SLEEP repeatedly until "SLEEP OFF" appears on the front panel display. After a few seconds, "SLEEP OFF" disappears, and the "SLEEP" indicator goes off. SLEEP Manually adjusting speaker levels You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources through the MULTI CH INPUT jacks. Please note that this operation will override the level adjustments made in "AUTO SETUP" (page 24), "Speaker level" (page 50) and "Using the test tone" (page 46). POWER TV POWER AV AMP y The sleep timer setting can also be canceled by pressing STANDBY on the remote control (or STANDBY/ON on the front panel) to set this unit to the standby mode. 1 REC AUDIO DISC SKIP + VOL ­ 2 LEVEL TITLE TV INPUT SET MENU MUTE + TV VOL MENU A/B/C/D/E CH ­ PRESET TEST TV MUTE SELECT CH + PRESET ON SCREEN STRAIGHT TV VOL RETURN ­ DISPLAY EFFECT 3 AMP 1 2 Press AMP to select the AMP mode. Press LEVEL repeatedly to select the speaker you want to adjust. [. . . ] and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 to 1710 kHz [Asia and General models] . . . . . . . . . . . . . . . . . 530/531 to 1710/1611 kHz [Other models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 to 1611 kHz · Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]