User manual YAMAHA C60-2000

[. . . ] IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Failure to follow instructions could void your FCC authorization to use this product in the USA. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. [. . . ] [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. European models Purchaser/User Information specified in EN55103-1 and EN55103-2. Conforms to Environments: E1, E2, E3 and E4 4 C60-2000 Owner's Manual Thank you for choosing the Yamaha C60-2000 HD-SDI(*) De-multiplexer card. The C60-2000 is an HD-SDI de-multiplexer Mini-YGDAI card for use with compatible Yamaha professional audio equipment. The card enables you to input up to two audio groups (four channels per group; total eight channels) to a host device, by selecting them from four audio groups (total 16 channels) that are multiplexed into a HD-SDI signal. To take full advantage of the superior functionality of the C60-2000 and enjoy years of trouble-free use, please read this manual before you begin using the product. * This card does not support SD-SDI. About the host devices in which the C60-2000 can be installed Before installing the card in a host device, please refer to the Yamaha Pro Audio web site for the latest information on the compatible host devices in which the card can be installed. Yamaha Pro Audio website: http://www. yamahaproaudio. com/ Installation information Please refer to the owner's manual supplied with the host device for installation information. In addition to securing the card in place, the fixing screws at the left and right of the card function as electrical grounds. Be sure to screw them in tightly. Accessories Owner's Manual C60-2000 Owner's Manual 5 ENGLISH Introduction Part Names and Functions Panel MODE Switches Move the switches down to set to ON. Embedded Audio Errors Details UNLOCK Presence of any audio group packet CRC error of video signal sent to audio block Phase data error of the selected audio group(s) Data block number error Parity error in audio packet Error correcting code error Checksum error in the selected audio group(s) ON error error error error -- -- -- -- OFF error error error error error error error error ON: A filter is applied to a detected embedded audio error marked with a [--] in the list above. The STATUS LEDs will not indicate the status of errors marked 8 C60-2000 Owner's Manual F STATUS LED [1-4] LED: Indicates the status of channels 1 through 4 [5-8] LED: Indicates the status of channels 5 through 8 LED Indicator Off (dark) Red flash (Slow*1) Orange flash (Slow*1) Red Red flash (Fast*2) Orange flash (Fast*2) Orange Green Description of Status (Error) No SDI-input signal is detected or being input. Alternatively, no audio group has been selected. A CRC error has occurred in the video signal sent to the audio block. An error has occurred in the embedded audio packet. Embedded audio is locked correctly. *1. Flashes approximately four times per second. Note: · If an error that cannot be attributed to any channel has occurred, STATUS LEDs [1-4] and [5-8] will provide the same indication. · If multiple errors have occurred simultaneously, the priority of the STATUS LEDs indication is the descending order of the list above. G HD-SDI INPUT Connector This is a BNC connector that inputs HD-SDI signals. H HD-SDI THRU Connector This is a BNC connector that outputs non re-clock and active thru HD-SDI signals. Note: We recommend that you use a 5C-FB coaxial cable(*), or a coaxial cable that features excellent performance equivalent to that of the 5C-FB cable. The 5C-FB cable transmits HD-SDI signals over a distance of up to 100 meters. * The attenuation of the 5C-FB cable at 750 MHz is approximately 20dB/100m. C60-2000 Owner's Manual 9 ENGLISH with [--] in the list. Audio will be input to the slot channels, and will not be muted regardless of the SW6 setting. Dip Switches (SW2) ON 6 7 A Emu Switch If you set this switch to ON and the Native switch to OFF, the host device will recognize the card as a Yamaha MY8-AD96 AD card. B Native Switch If you use the card in a future host device that supports the Native mode, setting this switch to ON and the Emu switch to OFF will enable you to make best use of the C60-2000 function. [. . . ] Puesto que las especificaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite información a su distribuidor Yamaha. * Le specifiche e le descrizioni presenti in questo manuale sono fornite a fini puramente informativi. si riserva il diritto di modificare prodotti o specifiche in qualsiasi momento senza preavviso. Dato che le specifiche, le apparecchiature o le opzioni possono essere diverse da paese a paese, verificarle con il proprio rappresentante Yamaha. ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO 72 C60-2000 Owner's Manual Memo C60-2000 Owner's Manual 73 ITALIANO ESPAÑOL FRANÇAIS DEUTSCH ENGLISH For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. NORTH AMERICA CANADA Yamaha Canada Music Ltd. [. . . ]