User manual YAMAHA CA-600

[. . . ] Model: Serial No. : The serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place for future reference. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. SAFETY INSTRUCTIONS 1 2 3 4 5 Read Instructions ­ All the safety and operating instructions should be read before the unit is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the unit and in the operating instructions should be adhered to. [. . . ] Check the contents and the number of preset stations by following the procedure of the section "To recall a preset station" on page 45. To recall a preset station Simply follow the procedure of the section "To recall a preset station" on page 45. A recalled station is shown by the frequency on the display. Notes q You can replace a preset station by another FM or AM station manually by simply following the procedure of the section "To store stations" on page 44. q If the number of received stations is not enough to be stored up to E-8, the search will be finished automatically after searching all frequencies. q With this function, only FM stations with sufficient signal strength are stored automatically. If the station you want to program is weak in signal strength, tune to it in monaural manually and program it by following the procedure of the section "To store stations" on page 44. 46 BASIC OPERATION English Exchanging preset stations You can exchange the places of two preset stations with each other as shown below. NATURAL SOUND AV RECEIVER RX V2095 CINEMA DSP 7ch INPUT SELECTOR 20 VOLUME l6 l2 28 8 STANDBY/ON 40 4 INPUT MODE 60 2 0 ­dB SPEAKERS A B PROGRAM EFFECT EXT. DECODER A/B/C/D/E PRESET STATIONS TUNING PRESET/TUNING FM/AM MEMORY TUNING MODE PHONES BASS TONE EXTENSION BYPASS 2 3 4 BASS l 0 l 2 3 4 5 5 2 3 4 TREBLE l 0 l 2 3 4 5 5 BALANCE l 2 3 4 L5 0 l 2 3 4 5R REC OUT/ZONE 2 SOURCE/REMOTE DVD/LD TAPE/MD TV/DBS VCR 1 VCR 2 VIDEO AUX CD TUNER PHONO EDIT MAN'L/AUTO FM AUTO/MAN'L MONO VIDEO AUX Example) If you want to exchange the preset stations on E-1 and A-5 with each other. 2, 4 4 PRESET/TUNING EDIT 1 2 Recall the preset station on E-1 (by following the method of "To recall a preset station" on page 45). PRESET/TUNING EDIT SPEAKERS A Press and hold for more than 3 seconds. Flashes. 3 Recall the preset station on A-5 by following the same method with step 1. MEMORY STEREO AUTO SPEAKERS A Shows the exchange of stations is completed. Flashes. 47 BASIC OPERATION Using digital sound field processor (DSP) This unit incorporates a sophisticated, multi-program digital sound field processor. The processor allows you to electronically expand and change the shape of the audio sound field from both audio and video sources, creating a theater-like experience in your listening room. You can create an excellent audio sound field by selecting a suitable sound field program (this will, of course, depend on what you will be listening to), and adding desired adjustments. In addition, this unit incorporates a Dolby Digital decoder and a Dolby Pro Logic Surround decoder for multi-channel sound reproduction of sources encoded with Dolby Surround, and a DTS decoder for multi-channel sound reproduction of sources encoded with DTS. The operation of these decoders can be controlled by selecting a corresponding DSP program including a combined operation of YAMAHA DSP and Dolby Digital, Dolby Pro Logic Surround or DTS. When some program is selected and the input signal of the source is encoded with DTS, DTS is automatically decoded. The following indicators on the display panel show you what sound processing is being made. Note If you change the LD (or CD) being played back with DTS decoded to another disc not encoded with DTS when the red "dts" indicator is illuminated, playing back the newly selected disc will output no sound. In this state, the red "dts" indicator flashes to show that this unit is locked in the DTS-decoding mode. To play back the disc normally, change the current DTSdecoding mode to another mode by pressing an input selector key on the remote controller or the INPUT MODE button on the front panel so that the red "dts" indicator turns off. To cancel the effect sound The EFFECT button on the front panel or the EFFECT ON/OFF key on the remote controller make it simple to compare the normal stereo sound with the fully processed effect sound. To cancel the effect sound and monitor only the main sound, press the EFFECT ON/OFF key or the EFFECT button. Press the EFFECT ON/OFF key or the EFFECT button a second time to restore the effect sound. Front panel EFFECT EFFECT 1 2 3 4 5 DIGITAL PRO LOGIC DSP DIGITAL SOURCE AC 3 DTS PCM 1 Lights up when a DVD source encoded with DTS is played back and DTS is decoded. Remote control 2 Lights up when an LD source or a CD source encoded with DTS is played back and DTS is decoded. 3 Lights up when Dolby Digital is being decoded and the signals of selected source encoded with Dolby Digital is not in 2-channels. 4 Lights up when Dolby Pro Logic Surround is being decoded. 5 Lights up when Digital Sound Field Processor is turned on. The display panel or the monitor screen will show the selected subprogram according to the type of the decoding. [. . . ] 0. 286 Vp-p/75 ohms Maximum Input Level . . . . . . . More than 1. 5 Vp-p Signal-to-Noise Ratio . . . . . . . . . . . More than 50 dB Monitor Out Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hz to 10 MHz, ­3 dB FM SECTION Tuning Range [U. S. A. [. . . ]