User manual YAMAHA CBXK1E

[. . . ] FCC INFORMATION (U. S. A. ) IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. [. . . ] To shift the keyboard down one octave, press N. When the octave is changed, the LEDs rapidly flash one, two, three or four times, according to the selected octave range. For example, when the setting is changed to two octaves below normal, the left lamp flashes twice. s Normal octave setting. OCTAVE NOTE s At the lowest and highest octave settings, keys outside the legal MIDI note range will repeat the center octave range. 11 Using the CBX-K1 -- Basic Operations Using the SHIFT-Related Functions The enormous flexibility and power of the CBX-K1 is in its "hidden" or SHIFT-related functions -- allowing you to send virtually any kind of MIDI message directly from the keyboard or use the ASSIGNABLE Wheel for real-time control change. Many of the functions can be done with one or two keystrokes, while others require you to enter a number value and press one of the L keys to execute the function. All functions can be accessed or executed by using one of the operations described below. SEQUENCER SHIFT STOP CONTINUE START TEMPO 2) Holding C, pressing the function's key and then L. These functions are indicated with a dashed underline on the panel (for example, GM ON and XG ON) and require pressing L to execute. Holding C, pressing the function's key, entering a value and then pressing L. These functions are indicated with an underline on the panel (for example, PROGRAM CHANGE and TEMPO), and require that a value (Decimal or Hexadecimal) be entered. 3) PROGRAM BANK PROGRAM SELECT CHANGE GM ON RESET SOUND OFF XG ON MERGE ON/OFF SYSTEM MIDI CH FIXED VELOCITY WHEEL ASSIGN RPN CONTROLLER NRPN DRUM NUMBER TRANSPOSE 1 2 3 4 5 6 7 8 9 A B C D E F 0 ENTER HEXA DECIMAL DECIMAL q In using the SHIFT-related functions, remember: Keep holding down C until the end of the operation. If C is released in mid-operation, you'll have to start the operation all over again. OCTAVE OCTAVE SHIFT OCTAVE RESET MIDI functions (Group A and Group B) Value entry (Decimal and Hexadecimal) L keys In the instructions that follow, "L" refers to either of the ENTER keys, J or K. In other words, this means that either key can be used, unless indicated otherwise. NOTE s The V / B lamps flash briefly when a function is executed or a message is sent. The MIDI functions can be generally divided into three types, according to their operation. 1) Holding C and pressing the function's key. For these functions, such as Sequencer Stop and Start, pressing L is not necessary. These functions are shown on the panel without underline. q Functions Assigned to the Keyboard Panel Name STOP CONTINUE START TEMPO BANK SELECT PROGRAM CHANGE GM ON SOUND OFF XG ON MERGE ON/OFF MIDI CH FIXED VELOCITY RPN CONTROLLER NRPN DRUM NUMBER TRANSPOSE Q TRANSPOSE W Group A Function Stop Continue Start Tempo Bank Select Program Change GM On All Sound Off (each channel) XG On Merge On/Off (each channel) MIDI Channel Fixed Velocity Wheel Assign (RPN) Wheel Assign (controller number on panel) Wheel Assign (NRPN) Drum Number Transpose Down Transpose Up Group B Function Song Select Song Position Pointer Reset All Controllers -- -- -- -- All Sound Off (all channels) GM-B Reset -- Merge On/Off (each channel) Touch Sensitivity Controller Direct Data Send (RPN) Controller Direct Data Send (controller number on panel) Controller Direct Data Send (NRPN) Device Number Wheel Invert MSB/LSB Invert 12 Using the CBX-K1 -- Basic Operations Basic Operations Selecting Group A and Group B Functions q Selecting Group A Functions: Hold down C and press the appropriate key. (See pages 14 and 18 for specific Group A functions and how to use them. ) q Selecting Group B Functions: Hold down C and press K. The Group B functions are available as long as you continue to hold down C. (See pages 16 and 20 for specific Group B functions and how to use them. ) q Entering MSB/LSB Values with K (3 digit bytes for MSB, 3 digit bytes for LSB; 6 digits total message). For messages beginning with zeroes, the first zeroes can be omitted. Examples: * 3 K: results in a value of MSB = 000, LSB = 003. * 0 3 K: results in a value of MSB = 000, LSB = 003. * 1 0 0 3 K: results in a value of MSB = 001, LSB = 003. * 0 1 0 0 3 K: results in a value of MSB = 001, LSB = 003. Entering Values Value entry on the CBX-K1 can be done in two number systems: Decimal and Hexadecimal. The keys labeled A through F are for Hexadecimal entry. q Entering a decimal value: Hold down C, press the appropriate function key, enter the desired value in decimal format, then press K. [. . . ] The MIDI transmit/receive buffer is cleared. Damper Off, All Note Off, All Sound Off messages are transmitted over all channels. Transmission of messages (including <<FE>> and <<F8>>) are interrupted for approximately 0. 8 seconds. During this time, operations from the CBX-K1 are ignored. [. . . ]