User manual YAMAHA CDC-635

[. . . ] CDC-635 Natural Sound Compact Disc Player 5-Disc Carousel Auto-changer PLAYXCHANGE; Disc changing capability while playing another Random Access Programmable Play Random-Sequence Play Single Track/Entire Disc/All Disc Repeat Play Remote Control Capability Thank you for selecting this YAMAHA Compact Disc Player. CAUTION OWNER'S MANUAL RISK OF ELECTRIC SHOCK DO NOT OPEN CONTENTS Safety Instructions. . . . . . . . . . . . . . . . . . . . 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Program Play. . . . . . . . . . . . . . . . . . . . . . . . . . 10 Repeat Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the SKIP button is pressed, play will return to the beginning of the track now being played. This indication appears while the unit is mixing up tracks. Total remaining time on the disc will not be displayed during random-sequence play. q q q q 9 PROGRAM PLAY You can enjoy listening to your favorite tracks selected from one or several discs in any desired order using programmed play. * The use of the remote control transmitter is recommended for easier operations. 2 PROG MODE S/F REPEAT 1 2 3 CLEAR RANDOM 3 4 5 1 or 5 1 3 +10 4 5 6 7 8 9 0 3 1 Stop the unit. DISC SKIP PAUSE PLAY SKIP INDEX STOP SEARCH ­ OUTPUT LEVEL + 2 4 Select the desired track. 4 or (Select a track number. ) or 2 or (Press once. ) *Repeat step 3 and 4 to set more programs. 3 If necessary, select the desired disc. DISC SKIP 5 When the programming is completed; or or Display information during program play Shows the program number for the track to be set next. Shows the selected disc and track number. Shows the total time of the tracks currently programmed, if tracks are selected from one disc only. Shows only the numbers of programmed tracks. * If "P-01" does not appear in the display after the PROG button is pressed, press the TIME display mode-select button. * If the total time reaches 100 minutes or more, only the last two-digits will be displayed for the three-digit number. 10 Notes q You can set as many as 20 programs at one time. q If you will make programming with the DISC 1 tray empty, be sure to press a DISC SKIP button before starting programming. q The total time of the programed tracks will not be displayed, if tracks are selected from more than one disc. q The total time of the programmed tracks will not be displayed, if a track number higher than 20 is programmed. q q q If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks. To return to the previous display, press the TIME display mode-select button once again. The SKIP ( and ) button can be used during playing, but only within the range of the programmed tracks. The SEARCH ( and ) button can be used during playing to search through all tracks, including unprogrammed tracks. To stop program play q q To check programmed data 1. If the unit is in the play mode, press the STOP button. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. Press the STOP button. The first track number programmed will be displayed. Play will begin from the beginning of the program. To cancel a programmed setting There are several methods, as described below. q Press the CLEAR button while the unit is stopped. q Press the STOP button while the unit is stopped. q Switch off the power. To correct programmed data 1. [. . . ] If the problem persists, the cables may be defective. Move the tuner and player farther apart. Change position of the main unit. SPECIFICATIONS AUDIO SECTION Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hz ­ 20 kHz, ±0. 5 dB De-emphasis equalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]