User manual YAMAHA CDC-755

[. . . ] CDC-755 Natural Sound Compact Disc Player Thank you for selecting this YAMAHA Compact Disc Player. OWNER'S MANUAL CONTENTS Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Identification of Components. . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] q If you will program tracks from more than one disc, before you press the PROG button, check the total recorded time of each disc on the disc tray by pressing the DISC SKIP button in turn. Without this operation, the total time of the programmed tracks will not be displayed during programming. q q q q The total time of the programmed tracks will not be displayed, if a track number higher than 20 is programmed. If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks or no information. To return to the previous display, press the TIME display mode-select button once again. The SKIP ( and ) buttons can be used during playing, but only within the range of the programmed tracks. The SEARCH ( and ) buttons can be used during playing to search through all tracks, including unprogrammed tracks. To stop program play q To check programmed data 1. If during program play, press the STOP button. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. q Press the STOP button. The first programmed track number will be displayed. Play will begin from the beginning of the program. To cancel a programmed sequence There are several methods, as described below. q Press the STOP button while the unit is stopped. q Switch off the power. To correct programmed data 1. Follow the procedure described in "To check programmed data". Display the track number to be corrected by pressing the SKIP button. Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. After the correction has been completed, press the PROG button or PLAY button once again. 15 PROGRAM FILING You can make this unit store (file) program data of your own choosing. With this function, you can play a disc with your favorite program at any time without making it again. However, note that you can not file program data which consists of tracks selected from more than one disc. OPEN/CLOSE DIMMER TIME OPEN/CLOSE PROG TAPE REPEAT RANDOM PROG 1 2 3 MODE Numeric buttons 4 5 6 +10 0 7 8 9 DISC SKIP DISC SKIP SKIP SEARCH DISC SCAN PAUSE PLAY PLAY INDEX STOP STOP ­ OUTPUT LEVEL SYNCHRO + PROG FILE/SAVE DISC STOP OPEN/CLOSE PLAY/PAUSE POWER Numeric buttons 0 To file data of tracks programmed in a desired order 1 2 Follow step 1 ­ 3 on page 14. 3 FILE/ SAVE Select track numbers in a desired order. 1 2 3 SAVE 4 5 6 + 10 7 8 9 0 * If tracks have already been programmed, make sure that "TRACK" is flashing continuously in the display. (If a program play is being performed, press the STOP button, and then press the PROG button. ) Notes q Program data filed in this way can be retained for about two weeks with the power switched off. q One program can be filed for one disc. [. . . ] If the problem persists, the cables may be defective. Move the tuner and this unit farther apart. Change position of the main unit. SPECIFICATIONS AUDIO SECTION Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hz ­ 20 kHz, ±0. 5 dB Harmonic distortion+noise (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]