User manual YAMAHA CDC-835

[. . . ] Natural Sound Compact Disc Player 5-Disc Carousel Auto-changer PLAYXCHANGE; Disc changing capability while playing another Random Access Programmable Play Random-Sequence Play Single Track/Entire Disc/All Disc Repeat Play Program Data Filing Capability 5-Mode Digital Equalizer 10-Disc Relay Play by Connecting Two CDC-835s Display Brightness Changing Capability Concealed Control Panel Remote Control Capability Thank you for selecting this YAMAHA compact disc player. CDC-835 S CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN OWNER'S MANUAL CONTENTS Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identification of Components . . . . . . . . . . . . . . . . . . . 5 Loading the Disc/Disc Play. . . . . . . . . . . . . . . . . . . . . . [. . . ] If the unit is in the play mode, press the STOP button. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. q Press the STOP button. The first track number programmed will be displayed. To resume play, press the PLAY/PAUSE button. Play will begin from the beginning of the program. To cancel a programmed setting There are several methods, as described below. q Press the CLEAR button while the unit is stopped. q Press the STOP button while the unit is stopped. q Switch off the power. To correct programmed data 1. Follow the procedure described in "To check programmed data". Display the track number to be corrected by pressing the SKIP button. Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. After the correction has been completed, press the PROG button or PLAY/PAUSE button once again. 13 PROGRAM FILING This unit has a function that can store (file) program data that has been set. You can play a disc with your favorite program at any time without setting it again. However, note that you can not file program data which consists of tracks selected from more than one disc. CLEAR FILE 0 PLAY/PAUSE OPEN/CLOSE STOP DISC DEQ (DIGITAL EQUALIZER) POWER PROG Numeric buttons To file data of tracks programmed in a desired order 1. (In step 4, turn the DEQ off (FLAT). ) 2. Select track numbers in a desired order (by pressing numeric buttons). Press the FILE button. FILE Filing of a DEQ (DIGITAL EQUALIZER)-mode unique for a disc Only one type of the DEQ-mode can be filed for any one disc. By this function, you can play a disc with the filed DEQ-mode at any time without re-setting it. q To file data of tracks programmed in a desired order with DEQ-mode 1. Select track numbers in a desired order (by pressing numeric buttons). Press the FILE button. FILE SAVE AUTO DISPLAY OFF * If programs have already been set, make sure that "TRACK" is flashing continuously in the display. [. . . ] If the problem persists, the cables may be defective. Move the tuner and player farther apart. Change position of the main unit. SPECIFICATIONS AUDIO SECTION Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hz ­ 20 kHz, ±0. 3 dB De-emphasis equalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]