User manual YAMAHA CDC-901

[. . . ] CDC-901/501 Natural Sound Compact Disc Player Thank you for selecting this YAMAHA Compact Disc Player. OWNER'S MANUAL CONTENTS Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Identification of Components . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Shows the selected disc and track number. Shows the total time of the tracks currently programmed. Shows only the numbers of programmed tracks on the selected disc. PROG TOTAL 6 * If "P-01" does not appear in the display after the PROG button is pressed, press the TIME display mode-select button. * If the total time exceeds 99 minutes and 59 seconds, the time will not be displayed. 14 Notes q You can program as many as 40 tracks at one time. q If you choose to perform programming with the DISC 1 tray empty, be sure to press a DISC SKIP button before starting programming. q You can program a whole disc by pressing "0", instead of one track. At that time, "AL" flashes in the display. q If you will program tracks from more than one disc, before you press the PROG button, check the total recorded time of each disc on the disc tray by pressing the DISC SKIP button in turn. Without this operation, the total time of the programmed tracks will not be displayed during programming. q q q q The total time of the programmed tracks will not be displayed, if a track number higher than 20 is programmed. If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks or no information. To return to the previous display, press the TIME display mode-select button once again. The SKIP ( and ) buttons can be used during playing, but only within the range of the programmed tracks. The SEARCH ( and ) buttons can be used during playing to search through all tracks, including unprogrammed tracks. To stop program play Press the STOP button. The first programmed track number will be displayed. Play will begin from the beginning of the program. To check programmed data 1. If during program play, press the STOP button. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. To cancel a programmed sequence There are several methods, as described below. q Press the STOP button while the unit is stopped. q CDC-501 only Press the CLEAR button while the unit is stopped. To correct programmed data 1. Follow the procedure described in "To check programmed data". Display the track number to be corrected by pressing the SKIP button. [. . . ] If the problem persists, the cables may be defective. Move the tuner and this unit farther apart. Change position of the main unit. SPECIFICATIONS AUDIO SECTION Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hz ­ 20 kHz, ±0. 5 dB Harmonic distortion+noise (1 kHz) <CDC-901> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]