User manual YAMAHA CDC-91

[. . . ] Natural Sound Compact Disc Player CDC-91 5-Disc Carousel Auto-changer Random-Sequence Play Remote Control Capability PLAYXCHANGE; Disc changing capability while playing another Random Access Programmable Play Single Track/Entire Disc/All Disc Repeat Play Thank you for selecting this YAMAHA Compact Disc Player. S CAUTION OWNER'S MANUAL RISK OF ELECTRIC SHOCK DO NOT OPEN CONTENTS Safety Instructions. . . . . . . . . . . . . . . . . . . . 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Program Play. . . . . . . . . . . . . . . . . . . . . . . . . . 10 Repeat Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the SKIP button is pressed, play will return to the beginning of the track now being played. This indication appears while the unit is mixing up tracks. Total remaining time on the disc will not be displayed during random-sequence play. q q q q 9 PROGRAM PLAY You can enjoy listening to your favorite tracks selected from one or plural discs in any desired order using a programmed play. * The use of the remote control transmitter is recommended for easier operations. 2 4 5 1 or 3 51 3 42 3 1 Stop the unit. 4 or Select the desired track. (Select a track number. ) or 2 or (Press once. ) *Repeat steps 3 and 4 to set more programs. 3 If necessary, select the desired disc. 5 When the programming is completed; or or Display information during program play Shows the program number for the track to be set next. Shows the selected disc and track number. Shows the total time of the tracks currently programmed, if tracks are selected from one disc only. Shows only the numbers of programmed tracks. * If "P-01" does not appear in the display after the PROG button is pressed, press the TIME display mode-select button. * If the total time reaches 100 minutes or more, only the last two-digits will be displayed for the three-digit number. 10 Notes q You can set as many as 20 programs at a stretch. q If you will make program setting with the DISC 1 tray empty, be sure to press the DISC SKIP button before starting program setting. q The total time of the programed tracks will not be displayed, if tracks are selected from more than one disc. q The total time of the programmed tracks will not be displayed, if the number of track higher than 20 is programmed. q q q If, during program setting, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks or no information. To return to the previous display, press the TIME display mode-select button once again. The SKIP ( and ) button can be used during playing, but only within the range of the programmed tracks. The SEARCH ( and ) button can be used during playing to search through all tracks, including unprogrammed tracks. To stop program play q q To check programmed data 1. If the unit is in the play mode, press the STOP button. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. Press the STOP button. The first track number programmed will be displayed. To resume play, press the PLAY/PAUSE button. Play will begin from the beginning of the program. To cancel a programmed setting There are several methods, as described below. q Press the CLEAR button on the remote-control transmitter while the unit is stopped. q Press the STOP button while the unit is stopped. [. . . ] If the problem persists, the cables may be defective. Move the tuner and player farther apart. Change position of the main unit. SPECIFICATIONS AUDIO SECTION Frequency response . . . . . . . . . . . . . . . . . . . 2 Hz ­ 20 kHz, +0. 5 / ­1 dB De-emphasis equalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]