User manual YAMAHA CDS700

[. . . ] G Compact Disc Player Lecteur Compact Disque OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. [. . . ] € These operations can also be performed when the unit is paused. € These operations can also be performed using b/w and f/a on the front panel. English 11 En BASIC OPERATION Changing front panel display ■ When playing back an Audio CD Audio CD You can select the following front panel displays (1 - 3) by pressing DISPLAY. 1 Elapsed time of the current track (Default) 2 Remaining time of the current track 3 Remaining time of the disc ■ When playing back a Data Disc or USB device Data Disc USB You can temporarily display the filename by pressing DISPLAY. These front panel display examples are for an MP3 file. 1 Elapsed time of the current track 2 Filename* Returns to the normal display after displaying a filename. * 28 characters maximum Note This unit can only show alphanumeric characters. Changing the brightness of the front panel display Press DIMMER to change the brightness level for the front panel display. Notes • Brightness is slightly decreased during playback, except when the level is set to maximum. € Brightness may temporarily be decreased for some operations, except when the level is set to maximum. € This setting is retained even if you turn off this unit. Each time you press DIMMER, the brightness level changes in the following order: Max (brightest) Level1 (default) Level2 Level3 (darkest) Max 12 En RANDOM-SEQUENCE PLAY Audio CD Data Disc USB Note These operations can also be performed for Data Disc/USB. You can play back the tracks in random sequence. To perform random-sequence play Press , and then, RANDOM. + To cancel random-sequence play Press . OPERATION REPEAT PLAY Repeating a selected item Audio CD Data Disc USB S (Single repeat) A single track is played back repeatedly. You can play back a single track or all tracks repeatedly by pressing REPEAT during playback. The repeat playback mode changes each time you press REPEAT. ALL (Full repeat) All tracks (the entire disc) are played back repeatedly. Note (Single repeat) These operations can also be performed for Data Disc/USB. Y Repeat play also works for program play and random-sequence play. (Full repeat) (off) English 13 En REPEAT PLAY Repeat A-B Audio CD You can repeat a specified section of a track by pressing A/B during playback to set two points (start and end points). [. . . ] (4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha’s control. (5) Defects of the system into which this product is incorporated and/or incompatibility with third party products. (6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland. (7) Non AV (Audio Visual) related products. [. . . ]