User manual YAMAHA CDX-396

[. . . ] 6 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Random-Sequence Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Program Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note When the automatic spacing function is in effect, the display of the total time and of the total remaining time will include each of the 4 second non-recorded intervals placed between tracks. To cancel the automatic spacing function SPACE SPACE SPACE "SPACE" goes off from the display. Selecting time displays You can select any of the four time displays by pressing the TIME display mode-select button. Elapsed time of the track now playing Total remaining time on the disc TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 TIME TIME Remaining time of the track now playing Total disc play time TOTAL REMAIN 2 3 4 5 6 7 8 9 10 11 12 2 3 4 5 6 7 8 9 10 11 12 Note The remaining time will not be displayed if the track number is 25 or higher. 10 English Changing brightness of the display CDX-890, CDX-396 You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button. During play Normal illumination During stopped or paused Normal illumination DIMMER Dim Dim "OFF" * While the display illumination is off, the AUTO DISPLAY OFF indicator on the front panel is illuminated. Dim (The AUTO DISPLAY OFF indicator lights up. In this state, if a disc is played, the display illumination will be turned off. ) AUTO DISPLAY OFF CDX-490 If desired, you can change brightness of the display in three degrees by pressing the DIMMER button. DIMMER Normal illumination Slightly dim Dim When you listen with headphones Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL button. At that time, note that this adjustment will also vary the signal level output to the amplifier. CDX-890 only * If the FIXED (LINE OUT) terminals on the rear of this unit are connected to the amplifier etc. , the use of the OUTPUT LEVEL button will not vary the signal level output to the amplifier. PHONES ­ OUTPUT LEVEL + Open/close the control door CDX-890 only When it is not necessary to operate controls inside the control door, close the door. To open the door To close the door 11 RANDOM-SEQUENCE PLAY You can have the unit play the tracks on a disc in a random sequence selected by the unit's microcomputer. To perform random-sequence play Notes · This feature will not function during programming, or during programmed play. RANDOM · If the SKIP button is pressed during random-sequence play, the next randomly programmed track will be played. If the SKIP button is pressed, play will return to the beginning of the track now being played. This indication appears while the unit is mixing up tracks. Total remaining time on the disc will not be displayed during random-sequence play. · · STOP To cancel random-sequence play RANDOM or REPEAT PLAY You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. (OFF) REPEAT SINGLE REPEAT SINGLE REPEAT A single track is repeatedly played. * This is also available in the programmed-play mode and the random-sequence play mode. Follow the procedure described in "To check program data". Display the track number to be corrected by pressing the SKIP button. Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. After the correction has been completed, once again press the PROG button or the PLAY button. 4. INDEX SEARCH If the disc includes index numbers, play can be started from any desired index number. OPEN/ CLOSE SYNCHRO DIMMER TIME SPACE 1 PEAK 2 TAPE 3 CLEAR PROG INDEX 1, 3 4 5 6 +I0 2 7 8 9 0 REPEAT RANDOM SEARCH ­ OUTPUT LEVEL + PAUSE SKIP STOP PLAY 1 Select a track which has index numbers. 5 To cancel the index search function Press the INDEX button. Notes · Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. · If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. · For some discs, play may begin slightly prior to the actual designated index point. · If the disc has no encoded index points, play will begin from the start of the selected track. [. . . ] models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V, 50 Hz General model . . . . . . . . . . . . . . . . . . . . . 110/120/220/240V, 50/60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20W Dimensions (W x H x D) <CDX-890>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 002% or less <CDX-396>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]