User manual YAMAHA CDX-470

[. . . ] CDX-470 Natural Sound Compact Disc Player Random Access Programmable Play Random-Sequence Play Single Track/Entire Disc Repeat Play Automatic Tape-Programming Automatic Peak Level Searching Capability Display Brightness Changing Capability Remote Control Capability Thank you for selecting this YAMAHA Compact Disc Player. OWNER'S MANUAL CAUTION CONTENTS Safety Instructions. . . . . . . . . . . . . . . . . . . . 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Repeat Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Program Play. . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Shows only the numbers of programmed tracks. * If "P-01" does not appear in the display after the PROG button is pressed, press the TIME display mode-select button. * If the total time exceeds 99 minutes and 59 seconds, the time will not be displayed. 10 To stop program play Press the STOP button. The first track number programmed will be displayed. Play will begin from the beginning of the program. To cancel a programmed setting There are several methods, as described below. · Press the STOP button while the unit is stopped. · Switch off the power. To check programmed data 1. If the unit is in the play mode, press the STOP button. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. To correct programmed data 1. Follow the procedure described in "To check programmed data". 2 Display the track number to be corrected by pressing the SKIP button. Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. After the correction has been completed, once again press the PROG button or the PLAY button. INDEX SEARCH If the disc includes index numbers, play can be started from any desired index number. OPEN/ CLOSE 1 2 3 1, 3 4 5 6 7 8 9 0 10 INDEX 2 SKIP PLAY 1 Select a track which has index numbers. 3 2 INDEX Notes · Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (such as, for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included. · If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc. · For some discs, play may begin slightly prior to the actual designated index point. · If the disc has no encoded index points, play will begin from the start of the selected track. · The index number can be designated only while the INDEX number display is illuminated. 3 Select the desired index number. 5 11 TRACK PROGRAMMING FOR RECORDING TO TAPE This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape's total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape. [. . . ] The remote control transmitter does not work. SPECIFICATIONS AUDIO SECTION Frequency response . . . . . . . . . . . . . . . . . . . . . 10 Hz 20 kHz, 0. 5 dB De-emphasis equalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 5 dB Harmonic distortion + noise . . . . . . . . . . . . . . . . . . . . . . . . . 0. 003% (1 kHz) S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]