User manual YAMAHA CDX-596

[. . . ] UCA CDX-596/496/396 Compact Disc Player Lecteur Compact Disque OWNER'S MANUAL MODE D'EMPLOI · Explanation of Graphical Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT Please record the serial number of this system in the space below. Model: Serial No. : The serial number is located on the rear of the main unit. [. . . ] * If you turn on the power again with a disc still on the tray, the disc starts playing automatically from the first track. * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played. Notes After closing the disc tray by pressing OPEN/CLOSE, the display shows the total number of tracks and the total recorded time of the disc for a few seconds. CDX-596 1 2 3 4 5 6 7 8 9 10 11 12 Additionally, you can close the disc tray by pressing ( ), a numeric button or RANDOM, or by pressing the front edge of the disc tray gently. If the tray is closed in one of these ways, play will begin automatically; however, the display will not show the total number of tracks nor the total recorded time of the disc. CDX-596 only If you load a CD-TEXT disc, the display also shows the disc title after showing the total number of tracks and the total recorded time of the disc. CDX-496, CDX-396 Caution When the disc tray is open, do not touch the inside gear wheel. If you touch the gear wheel, your finger may be caught in the closing tray and injured. TOTAL Gear wheel E-9 To skip to the beginning of the desired track (SKIP SEARCH) To play from the beginning of the next track These operations can also be performed when the unit is paused or stopped. When using or on the remote control: If (or ) is pressed and held, the track number is continuously changed to higher numbers (or lower numbers). When using SKIP/SEARCH on the front panel: Be careful not to press and hold the button, otherwise the selected track is played forward (or backward) rapidly. (Press once. ) To play from the beginning of the current track (Press once. ) To play from the beginning of the preceding track (Press twice. ) To advance or reverse play rapidly (MANUAL SEARCH) To advance rapidly The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. Manual search can also be performed while disc play is paused, though no sound will be heard. When using SKIP/SEARCH on the front panel: Be careful not to release the button just after it is pressed, otherwise the play is skipped to the beginning of the next track or returned to the beginning of the current track. (Press and hold. ) To reverse rapidly (Press and hold. ) E-10 English Other useful functions Changing displays CDX-596 You can select any of the four time displays (1 ­ 4) by pressing TEXT/TIME. When you play a CD-TEXT disc, the disc title, artist name, and track name (5 ­ 7) are also displayed. 1 Elapsed time of the current track 2 3 4 5 6 7 8 9 10 11 12 7 Track name 2 3 4 5 6 7 8 9 10 TRACK CD-TEXT 11 12 2 Remaining time of the current track 2 3 4 5 6 7 8 9 10 11 12 6 Artist name TEXT/ TIME ARTIST 2 3 4 5 6 7 8 9 10 CD-TEXT 11 12 3 Total disc play time 2 3 4 5 6 7 8 9 10 11 12 4 Total remaining time on the disc 2 3 4 5 6 7 8 9 10 11 12 5 Disc title TITLE 2 3 4 5 6 7 8 9 10 CD-TEXT 11 12 Notes The disc title, artist name, or track name may not be displayed with some CD-TEXT discs. In that case, "(NO ENTRY)" appears on the display. When playing a CD-TEXT disc, "CD-TEXT" also lights up on displays 1 ­ 4. CDX-496 and CDX-396 You can select any of the four time displays by pressing TIME. 1 Elapsed time of the current track 4 Total remaining time on the disc TOTAL REMAIN TIME 2 Remaining time of the current track REMAIN 3 Total disc play time TOTAL E-11 Changing brightness of the display CDX-596 You can change the brightness of the display (or turn off the illumination) by pressing DIMMER. During play Normal illumination DIMMER During a stop or a pause Normal illumination Dim Dim (off)* * While the display illumination is off, the AUTO DISPLAY OFF indicator on the front panel lights up. Dim* * The AUTO DISPLAY OFF indicator lights up. If a disc is played in this state, the display illumination will be turned off. AUTO DISPLAY OFF CDX-496, CDX-396 If desired, you can change brightness of the display in three degrees by pressing DIMMER. DIMMER Normal illumination Slightly dim Dim Automatic spacing If you record a disc onto tape with an insufficient time space between tracks, the tape deck will not be able to perform blank search operations on the tape correctly. To prevent such a search mistake of the deck, press SPACE and light up "SPACE" on the display before recording. Spaces of about 4 seconds are inserted between the tracks. Note When the automatic spacing function is in effect, the display of the total time and of the total remaining time will include each of the 4 second intervals placed between tracks. To cancel the automatic spacing function Press SPACE. SPACE SPACE SPACE "SPACE" disappears from the display. Adjusting the level of signals output to the amplifier and the headphone listening level CDX-596 and CDX-496 only You can adjust the level of signals output to the amplifier by pressing ­ OUTPUT LEVEL +. ­ OUTPUT LEVEL + When you listen with headphones, connect the headphones to the PHONES jack and adjust the volume by pressing ­ OUTPUT LEVEL +. At that time, note that this adjustment will also vary the signal level output to the amplifier. PHONES PHONES E-12 English RANDOM-SEQUENCE PLAY The unit can play the tracks on a disc in a random sequence. To perform random-sequence play Press RANDOM. Notes This feature will not function while programming, or during programmed play. If (SKIP/SEARCH ) is pressed during randomsequence play, the next randomly programmed track will be played. If ( SKIP/SEARCH) is pressed, play will return to the beginning of the current track. [. . . ] 120V, 60 Hz Australia model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V, 50 Hz General model . . . . . . . . . . . . . . . . . . . 110/120/220/240V, 50/60 Hz Power consumption <CDX-596> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10W <CDX-496, CDX-396> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]