User manual YAMAHA CDX-880

[. . . ] CDX-880/580/480 Natural Sound Compact Disc Player Random Access Programmable Play Random-Sequence Play Single Track/Entire Disc Repeat Play Automatic Spacing Capability Automatic Tape-Programming Automatic Peak Level Searching Capability CD Synchronized Recording with a Compatible YAMAHA Tape Disk Display Brightness Changing Capability Remote Control Capability Thank you for selecting this YAMAHA Compact Disc Player. OWNER'S MANUAL CONTENTS Safety Instructions. . . . . . . . . . . . . . . . . . . . 2 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Repeat Play. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Program Play. . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] You can select the same track again. 2 PROG PROGRAM 4 TOTAL PLAY Display information during program play PROGRAM TOTAL PROGRAM TOTAL 123456 Shows the program number for the track to be set next. Shows the total time of the tracks currently programmed. Shows only the numbers of programmed tracks. Notes · In step 2, if "P-01" does not appear in the display, press the TIME display mode-select button. · If, during programming, the TIME display mode-select button is pressed, the program number display can be changed to display the total time of the programmed tracks. To return to the previous display, press the TIME display mode-select button once again. and ) button can be used during · The SKIP ( playing, but only within the range of the programmed tracks. and ) button can be used during · The SEARCH ( playing to search through all tracks, including unprogrammed tracks. · The PAUSE mode can also be programmed (one time only), if so desired, by pressing the TAPE button instead of a numeric button. (In this case, " B" is illuminated in the display. ) · If, for a compact disc with 25 tracks or more, track number 25 or higher is programmed, the total time will disappear from the display. * If the total time becomes 100 minutes or more, the highest position of the figure will not be displayed. 13 To stop program play Press the STOP button. The first programmed track number will be displayed. Play will begin from the beginning of the program. To check programmed data 1. If during program play, press the STOP button. Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing the SKIP button. To cancel a programmed setting There are several methods, as described below. · Press the STOP button or the CLEAR button while the unit is stopped. · Switch off the power. To correct programmed data 1. Follow the procedure described in "To check programmed data". Display the track number to be corrected by pressing the SKIP button. Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed. After the correction has been completed, once again press the PROG button or the PLAY button. 4. INDEX SEARCH If the disc includes index numbers, play can be started from any desired index number. PROG TAPE CLEAR PEAK SPACE S/F REPEAT RANDOM 1 2 3 +10 4 5 6 7 8 9 0 1, 3 2 SKIP PAUSE PLAY SEARCH INDEX STOP 1 Select a track which has index numbers. 3 To cancel the index search function Press the INDEX button. Notes · Not all discs have index numbers. [. . . ] 20W Dimensions (W x H x D) <CDX-880>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 x 96 x 281 mm (17-1/8" x 3-3/4" x 11-1/16") <CDX-580, CDX-480> . . . . . . . . . . . . . . . . . . . . . . . . . . . 435 x 96 x 270 mm (17-1/8" x 3-3/4" x 10-5/8") Weight <CDX-880> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 oz. ) <CDX-580, CDX-480> . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]