User manual YAMAHA CDX-E100

[. . . ] 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: - Other components, as they may cause damage and/or discoloration on the surface of this unit. [. . . ] Select a desired track by using the numeric buttons. Example: To select a track number 5 Press "0" and then, press "5". * In case of an MP3 or WMA file which has 100 files or more, press "0" twice and then, press "5". * Pressing a desired track and waiting for a few second can also start playback. Audio CD CD To stop playback Press . 0 5 The selected track/file number is displayed * If you press again, the playback starts from the first track. MP3, WMA (CDX-E100 only) MP3 * This display is an example of an MP3 disc. * The file number is recognized per disc, not per folder. That is, the number assigned to each file corresponds sequence of a disc. To search an folder/file on an MP3 or WMA disc (CDX-E100 only) You can play back the desired folder or file by using cursor buttons. 1 Press FOLDER g/h to select the desired folder. 3 Press FILE q / w to select the desired file. FOLDER FOLDER FILE ENTER FILE FILE ENTER FILE FOLDER FOLDER 2 Press ENTER. FOLDER 4 FILE Press ENTER. FOLDER FILE ENTER FILE ENTER FILE FOLDER FOLDER The playback starts from the selected file. 8 En English To skip to the beginning of the desired track (Skip search) To play back from the beginning of the next track These operations can also be performed when the unit is paused or stopped. Pressing and holding (or ) on the remote control skips tracks continuously toward lower (or higher) numbers. These operations can also be performed using / and / on the front panel. (Press once. ) To play back from the beginning of the current track (Press once. ) To play back from the beginning of the preceding track (Press twice. ) To advance or reverse playback rapidly (Manual search) To advance rapidly The sound can be heard (although slightly garbled) during manual search in either direction. This is convenient for locating a precise position within a track, or for reviewing the contents quickly. Each time is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse order) by pressing . To clear program data There are several methods, as described below. Press or CLEAR while the unit is stopped. Switch off the power. To correct program data 1. Follow the procedure described in "To check program data". Display the track number to be corrected by pressing / . Press a numeric button to select a desired track to replace the one displayed. The previously programmed track is cleared from the memory, and the new one is programmed. Press PROGRAM to complete the correction. To start program play immediately after making the correction, press instead of pressing PROGRAM. INDEX SEARCH If the disc includes index numbers, playback can be started from any desired index number. 1 To cancel the index search function Press INDEX. Notes Not all discs have index numbers. [. . . ] Wait 20 to 30 minutes after switching the unit ON before trying to play back a disc. Replace the disc with a correctlyrecorded disc playable with this unit. Improper amplifier operation. The OUTPUT LEVEL +/­ buttons are set at minimum. (CDX-E100 only) Sound "skips". [. . . ]