User manual YAMAHA CHH920

[. . . ] CLOSED HI-HAT HOLDER CHH-920 OWNER'S MANUAL Thank you for purchasing the Yamaha CHH-920 Closed Hi-Hat Holder. [. . . ] The angle of the cymbal can be adjusted by rotating the knurled-head bolt, located under the support plate, then securing the bolt in place with the fixing nut. t Mounting Pipe The 22. 2 mm diameter mounting pipe for the hi-hat holder makes possible a wide variety of set-ups. It can be mounted to YAMAHA tom holders and the bass side of double tom stands. The hi-hat holder can also be mounted with YAMAHA pipe clamps and clamp accessories such as Open Clamps (OC-910U and OC-920R), Arm Clamps (AC910), and Cymbal Stand Attachments (CSAT-924). w Hi-Hat Clutch To attach the top hi-hat cymbal, remove the clutch nut and place the top cymbal between the felts. Screw the clutch nut back onto the clutch bolt and tighten firmly. The lock nuts above the felt can be used to adjust the overall feel and sound of the hi-hat cymbals. For a loose sound, loosen the nuts off from the felt; for a tight sound, tighten the nuts onto the felt. [. . . ] The system is equipped with an indicator for easy reference and setting. Hi-Hat Clutch Clutch Bolt Lock Nut Felt Cymbal Support Plate Indicator Open Clamp Spring Tension Dial Wing Bolt Hi-Hat Clutch Clutch Nut Cymbal Support Plate Wing Nut Felt Metal Plate Position Clamp Cymbal Support Plate Knurled-Head Bolt Wing Nut (A) Rubber Washer * Specification and design are subject to change without notice. [. . . ]