User manual YAMAHA CLP-370

[. . . ] OWNER'S MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUAL DE INSTRUCCIONES IMPORTANT --Check your power supply-- Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] Turn on the Export mode. Press the [+/YES] buttons so that "OUt" appears on the display. If you do not want to export the file, press the [­/NO] button. NOTE If exporting has not successfully been completed, an "Err" message and the error code will appear alternately on the display. NOTE 3. Start exporting. Press the [+/YES] button. A "n y" appears in the display to confirm whether you wish to export the file or not, press the [+/YES] button again. If you do not want to export the file, press the [­/NO] button. A "n­y" message will appear on the display if a USB flash memory device contains a file with the same name as the one you are attempting to export. Press the [+/YES] button to execute the overwriting operation. Press the [­/NO] button to cancel exporting. When exporting to the USB flash memory device is completed, an "End" message will appear on the display. Press [­/NO] or [+/YES] button to exit from this display. After exporting, connect the USB flash memory device to your computer, and then open the text file named "ConnectionInfo. txt" in the root directory of the USB flash memory device to check the detailed connection information. Error Code You can check the description for the error code on the Yamaha website: http://music. yamaha. com/idc/ 52 CLP-370/340/330, CLP-S308/S306 Owner's Manual Internet Direct Connection (CLP-370/340, CLP-S308/S306) Other Internet Operations Checking the version number of the instrument You can check the version number of this instrument. Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 ­ 3 for similar instructions on page 49). Procedure 1. Select Function [F9. 4] (on the CLP-370/340) or F8. 4 (on the CLPS308/S306). Use the [TEMPO/FUNCTION , ] buttons to select Function F9. 4 (CLP370/340) or F8. 4 (CLP-S308/S306). Press the [+/YES] button so that the version number appears on the display. A "PrG" message and version number "x. xx" will appear alternately on the display. Return to the Sub-modes Selection mode Press the [+/YES] button to exit from the sub-modes. Exit from the Function mode Press the [TEMPO/FUNCTION] button to exit from function modes. Checking the version number of the LAN Port driver You can check the version number of the LAN Port driver. Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 ­ 3 for similar instructions on page 49). Procedure 1. Select Function F9. 5 (on the CLP-370/340) or F8. 5 (on the CLPS308/S306). Use the [TEMPO/FUNCTION , ] buttons to select Function F9. 5 (CLP370/340) or F8. 5 (CLP-S308/S306). Press the [+/YES] button so that the version number appears on the display. [. . . ] 09300, México, D. F. , México Tel: 55-5804-0600 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 SPAIN/PORTUGAL Yamaha Música Ibérica, S. A. [. . . ]