User manual YAMAHA CLP-380/370/340/330/S308PE/S306PE INSTALLATION GUIDE

[. . . ] Accessory CD-ROM for Windows Installation Guide/Installationshandbuch/Manuel d'installation/Guía de instalación SPECIAL NOTICES · The software and this Installation Guide are exclusive copyrights of Yamaha Corporation. · Use of the software and this guide is governed by the SOFTWARE LICENSE AGREEMENT which the purchaser fully agrees to upon breaking the seal of the software packaging. (Please read carefully the AGREEMENT at the end of this guide before installing the application. ) · Copying of the software or reproduction of this guide in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. · Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this guide and the software. [. . . ] 2 Click "Musicsoft Downloader" on the Start window. The page which explains the details about Musicsoft Downloader is displayed on the window. 3 Click "Musicsoft Downloader Download" button at the bottom of the window. The Download page on the web is displayed. Verify that your system meets the requirements before installing the software. English 1 Insert the included CD-ROM into the CD-ROM drive of the computer. Each menu on the window indicates the application or data contained in the Accessory CD-ROM. 2 Click "DIGITAL MUSIC NOTEBOOK" on the Start window. 3 Click the "Install" button, and follow the on-screen instructions to install the software. For Digital Music Notebook operating instructions see the help menu: launch the Digital Music Notebook application and click "Help". 6 Accessory CD-ROM for Windows Installation Guide Troubleshooting The driver cannot be installed. · Is the USB cable connected correctly? Cannot suspend or resume the computer correctly. · Do not suspend the computer while the MIDI application is running. · You may not be able to suspend/resume normally, depending on the particular environment (USB Host Controller, etc. ). Even so, simply disconnecting and connecting the USB cable will allow you to use the instrument functions again. Check the USB cable connection. Disconnect the USB cable, then connect it again. · Is the USB function enabled on your computer? When you connect the instrument to the computer for the first time, if the "Add New Hardware Wizard" does not appear, the USB function on the computer may be disabled. Perform the following steps. 1 Select [Control Panel]* [System] [Hardware] [Device Manager] (for Windows XP/2000), or select [Control Panel] [Device Manager] (for Windows Vista). 2 Make sure that no "!" or "x" marks appear at "Universal serial bus controller" or "USB Root Hub. " If you see an "!" or "x" mark, the USB controller is disabled. · Is any unknown device registered? How can I remove the driver? log on to Windows. Close all applications and windows that are open. 2 Insert the included CD-ROM into the CD-ROM drive. 3 Select [Start] [My Computer] (for Windows XP), or select [My Computer] (for Windows 2000), or select [Start] [Computer] (for Windows Vista). 4 Right-click the CD-ROM icon and select "Open" from the If driver installation fails, the instrument will be marked as an "Unknown device, " and you will not be able to install the driver. Delete the "Unknown device" by following the steps below. 1 Select [Control Panel]* [System] [Hardware] [Device Manager] (for Windows XP/2000), or select [Control Panel] [Device Manager] (for Windows Vista). 2 Look for "Other devices" in the menu "View devices by type. " 3 If you find "Other devices, " double-click it to extend the tree to look for "Unknown device. " If one appears, select it and click the [Remove] button. 4 Remove the USB cable from the instrument, and make the connection again. (See page 4. ) pop-up menu. 5 Select "USBdrvVista_" or "USBdrv2k_" folder "uninstall" folder "uninstall. exe" file and launch the "uninstall. exe. " file. Follow the on-screen instructions to uninstall the driver. n When using a 64-bit OS, click "uninstall_x64. exe. " from the "USBdrvVista_" folder. n If the "User Account Control" window appears, click [Continue]. When controlling the instrument from your computer via USB, the instrument does not operate correctly or no sound is heard. · Did you install the driver (page 4)?· Is the USB cable connected correctly? [. . . ] In addition, the Licensor may elect to terminate this License in the event of a material breach by you of any condition of this License or of any of your representations, warranties, covenants or obligations hereunder. Upon notification of such termination by the Licensor, you will immediately delete the Software from your computer and destroy the Documentation. 2. License 2. 1 The Licensor grants to you a non-exclusive non-transferable license to use this Software in accordance with the Documentation on any number of computers. Title to the Product is not transferred to you. [. . . ]