User manual YAMAHA CLP-133

[. . . ] To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel. For information on assembling the keyboard stand, refer to the instructions at the end of this manual. WICHTIG --Überprüfen Sie Ihren Netzanschluss-- Vergewissern Sie sich, dass die Spannung in Ihrem örtlichen Stromnetz mit der Spannung übereinstimmt, die auf dem Typenschild auf der Unterseite des Instruments angegeben ist. In bestimmten Regionen ist auf der Unterseite des Keyboards in der Nähe des Netzkabels ein Spannungswähler angebracht. Vergewissern Sie sich, dass der Spannungswähler auf die Spannung Ihres lokalen Stromnetzes eingestellt ist. [. . . ] To return to the previous indication, press the [­/NO] or [+/YES] button. NOTE Error Code You can check the description for the error code on the Yamaha website: http://music. yamaha. com/idc/ NOTE Yamaha recommends that you back up the Internet setting files (page 78). 50 CLP-370/340/330, CLP-S308/S306 Owner's Manual Internet Direct Connection (CLP-370/340, CLP-S308/S306) Checking the field strength (when using a USB wireless LAN adaptor) You can check the field strength on the display, if you are using a USB wireless LAN adaptor (Connection example 4 on page 47). Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 ­ 3 for similar instructions on page 49). NOTE The field strength can be displayed after making the Internet connection. NOTE If you are using a wireless game adaptor, the display pattern for "No wireless LAN is used" will appear. 1. Select Function F9. 3 (on the CLP-370/340) or F8. 3 (on the CLP-S308/S306). Use the [TEMPO/FUNCTION , ] buttons to select Function F9. 3 (CLP-370/ 340) or F8. 3 (CLP-S308/S306). 2. Press the [­/NO] or [+/YES] button The field strength indication will appear on the display for about three seconds. Field Strength Indications Radio Status No signal is present. Display Field strength: Weak Field strength: Medium Field strength: Strong No wireless LAN is used. CLP-370/340/330, CLP-S308/S306 Owner's Manual 51 ENGLISH Procedure Internet Direct Connection (CLP-370/340, CLP-S308/S306) Exporting the Connection Information This procedure lets you export the detailed information on the current connection as a text file to a USB flash memory device. You can check the information on your computer. Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 ­ 3 for similar instructions on page 49). NOTE The connection information file does not allow you to manually make Internet settings. The connection information file is set to "read only" and cannot be edited. Procedure ENGLISH 1. Select Function F9. 2 (on the CLP-370/340) or F8. 2 (on the CLP-S308/S306). Use the [TEMPO/FUNCTION , ] buttons to select Function F9. 2 (CLP-370/ 340) or F8. 2 (CLP-S308/S306). NOTE The export mode cannot be engaged while voice demo song playback is in use, when the [REC] button is on, or when user song playback is active. 2. Turn on the Export mode. Press the [+/YES] buttons so that "OUt" appears on the display. If you do not want to export the file, press the [­/NO] button. NOTE If exporting has not successfully been completed, an "Err" message and the error code will appear alternately on the display. NOTE 3. Exit from function mode Press the [TEMPO/FUNCTION] button to exit from the Function modes. CLP-370/340/330, CLP-S308/S306 Owner's Manual 53 ENGLISH Internet Direct Connection (CLP-370/340, CLP-S308/S306) Checking the version number of the USB-LAN Adapter driver You can check the version number of the USB-LAN Adapter driver. Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 ­ 3 for similar instructions on page 49). Procedure 1. Select Function F9. 6 (on the CLP-370/340) or F8. 6 (on the CLPS308/S306). Use the [TEMPO/FUNCTION , ] buttons to select Function F9. 6 (CLP370/340) or F8. 6 (CLP-S308/S306). Press the [+/YES] button so that the version number appears on the display. A "L-A" message and version number "x. x. x" will appear alternately on the display. Return to the Sub-modes Selection mode Press the [+/YES] button to exit from the Sub-modes. Exit from function mode Press the [TEMPO/FUNCTION] button to exit from the Function modes. 54 ENGLISH CLP-370/340/330, CLP-S308/S306 Owner's Manual Internet Direct Connection (CLP-370/340, CLP-S308/S306) Initializing Internet Settings You can initialize the Internet settings. Engage the function mode, then select the function number and enter the desired Submodes Selection mode (refer to steps 1 ­ 3 for similar instructions on page 49). Procedure 1. Select Function F9. 7 (on the CLP-370/340) or F8. 7 (on the CLPS308/S306). Use the [TEMPO/FUNCTION , ] buttons to select Function F9. 7 (CLP370/340) or F8. 7 (CLP-S308/S306). [. . . ] 25/F. , United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S. A. [. . . ]