User manual YAMAHA CLP-311

[. . . ] ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; ;;;;;;;;;;;; IMPORTANT Check your power supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] · You can record up to a maximum of about 1, 300 notes, depending on pedal usage and other factors. The [REC] button indicator will begin to flash when recorder memory is almost full, and recording will stop automatically. Stop Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RECORDER START/ REC STOP Press either the RECORDER [REC] or [START/STOP] button to stop recording. 11 Using the Recorder Changing the Initial Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The initial voice (including dual mode), damper pedal, soft pedal, and tempo settings made in step 2 of the recording procedure are actually recorded by the CLP-311. These initial settings can be changed after the recording is finished by pressing the [REC] button to engage the record ready mode, making the required changes, and then pressing the [REC] button again to exit from the record ready mode and register the changes. If you do this, be careful not to press the [START/STOP] button or a key on the keyboard, either of which will start recording and erase all previous recorded data. Erasing the recorded data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The recorded data can be erased by first pressing the [REC] button to engage the record ready mode, and then pressing the [START/ STOP] button twice without recording any data. Playback RECORDER START/ REC STOP To play back what you've recorded, simply press the RECORDER [START/STOP] button. Playback starts from the beginning of the recorded data, and will stop automatically at the end of the recorded data. You can also stop playback at any time by pressing the [START/ STOP] button. NOTE · It is possible to play along on the keyboard during playback. · The playback volume and tempo can be adjusted by using the [MASTER VOLUME] and [TEMPO] controls, respectively. · If the metronome is being used during playback, the metronome will stop when playback is stopped. · All recorder data will be erased when the CLP-311 power is turned off. It is possible to store recorded data to an external MIDI storage device such as the Yamaha DOU-10 Disk Orchestra Unit by using the Bulk Dump function described on page 16. · The playback data is not transmitted via the MIDI OUT connector. Fast Forward Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RECORDER START/ REC STOP MIDI/TRANSPOSE When you want to locate a specific point in a recording you can quickly move forward through the recording while monitoring the sound by pressing the [REC] button while holding the [MIDI/TRANSPOSE] button. 12 MIDI Functions A Brief Introduction to MIDI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Data Being Recorded MIDI Cable MIDI OUT MIDI IN MIDI OUT Playback Data MIDI IN MIDI OUT MIDI IN DOU-10 DOU-10 Clavinova Clavinova MIDI, the Musical Instrument Digital Interface, is a worldstandard communication interface that allows MIDI-compatible musical instruments and equipment to share musical information and control one another. This makes it possible to create "systems" of MIDI instruments and equipment that offer far greater versatility and control than is available with isolated instruments. For example, most MIDI keyboards (including the Clavinova, of course) transmit note and velocity (touch response) information via the MIDI OUT connector whenever a note is played on the keyboard. If the MIDI OUT connector is connected to the MIDI IN connector of a second keyboard (synthesizer, etc. ) or a tone generator (essentially a synthesizer with no keyboard), the second keyboard or tone generator will respond precisely to notes played on the original transmitting keyboard. The result is that you can effectively play two instruments at once, providing thick multi-instrument sounds. This same type of musical information transfer is used for MIDI sequence recording. A sequence recorder can be used to "record" MIDI data received from a Clavinova, for example. When the recorded data is played back, the Clavinova automatically "plays" the recorded performance in precise detail. The examples given above really only scratch the surface. The CLP-311 offers a number of MIDI functions that allows it to be used in fairly sophisticated MIDI systems. NOTE · Always use a high-quality MIDI cable to connect MIDI OUT to MIDI IN terminals. Never use MIDI cables longer than about 15 feet, since cables longer than this can pick up noise which can cause data errors. MIDI "Messages" Transmitted & Received by the Clavinova . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The MIDI information (messages) transmitted and received by the Clavinova are as follows: q Note and Velocity Data This information tells the receiving keyboard or tone generator to play a certain note (specified by the MIDI note number) at a certain dynamic level (specified by the MIDI velocity value). Note and velocity data is transmitted by the Clavinova whenever a key is pressed, and the Clavinova's internal AWM tone generator will "play" the corresponding note(s) whenever note and velocity data is received from an external MIDI device. q Program Change Numbers The CLP-311 transmits a MIDI program change number between 0 and 4 when one of its voice selectors is pressed. [. . . ] PIANO BULK DUMP FORMAT F0H, 43H, 73H 38 H (Product ID: CLP-311) 06H (Bulk ID) 02H (Bulk number) 03H, 0fH, 0aH, 02H (Data length= wxyzH 0x1fd1*2 bytes) [BULK DATA] (Sequence data) [CHECK SUM (1byte)] = 0-sum (BULK DATA) F7H 4. SYSTEM REALTIME MESSAGES [rrH] F8H: Timing clock FAH: Start FCH: Stop FEH: Active sensing Data Transmission Reception F8H Transmitted every Received as 96-clock 96 clocks tempo timing when MIDI clock is set to External FAH Recorder start Recorder start FCH Recorder stop Recorder stop FEH Transmitted every All notes are turned 200 milliseconds off if no data is received for more than 400 milliseconds * Caution: If an overrun framing error occurs the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs. Specifications/Technische Daten/ Caractéristiques techniques/Especificaciones CLP-311 KEYBOARD POLYPHONY VOICE SELECTORS RECORDER PEDAL CONTROLS OTHER CONTROLS JACKS/CONNECTORS INPUT & OUTPUT LEVEL/IMPEDANCE MAIN AMPLIFIERS SPEAKERS DIMENTIONS Music stand (W x D x H) down Music stand up WEIGHT 88 KEYS (A-1 ~ C7) 28 NOTES MAX. PIANO, HARPSICHORD, PIPE ORGAN START/STOP, REC SOFT/SOSTENUTO, DAMPER MASTER VOLUME, TEMPO, METRONOME, DEMO, MIDI/TRANSPOSE PHONES x 2, AUX OUT L/L+R & R, AUX IN L&R, MIDI IN/OUT AUX OUT: Output impedance 600 AUX IN: Input impedance 10 k/ Input sensitivity -10 dBm 20W x 2 16 cm x 2 1375. 2 x 525. 0 x 842. 6 mm (54-1/8" x 20-5/8" x 33-1/8") 1375. 2 x 525. 0 x 1017. 6 mm (54-1/8" x 20-5/8" x 40-1/16") 57. 5 kg (126. 8 lbs. ) * Sous toute réserve de modification des caractéristiques sans préavis. * Especificaciones sujetas a cambios sin previo aviso. * Specifications subject to change without notice. [. . . ]