User manual YAMAHA CLP-560E

[. . . ] To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel. WICHTIG Überprüfung der Stromversorgung Vergewissern Sie sich vor dem Anschließen an das Stromnetz, daß die örtliche Netzspannung den Betriebsspannungswerten auf dem Typenschild an der Unterseite des Instruments entspricht. In bestimmten Verkaufsgebieten ist das Instrument mit einem Spannungswähler an der Unterseite neben der Netzkabeldurchführung ausgestattet. Falls vorhanden, muß der Spannungswähler auf die örtliche Netzspannung eingestellt werden. Der Spannungswähler wurde werkseitig auf 240 V voreingestellt. [. . . ] Use the [­/NO] and [+/YES] buttons to turn backup "On" or "OFF". The default backup mode is "OFF". · Channel (Transmit, Receive) · Program Change ON/OFF · MIDI Transmit Transpose · Local ON/OFF · Control Change ON/OFF F8. 3/F9. 3: Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turns backup of the tuning functions listed below on or off. Use the [­/NO] and [+/YES] buttons to turn backup "On" or "OFF". The default backup mode is "OFF". · Transpose · Tuning · Scale (including base note) F8. 4/F9. 4: Pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turns backup of the pedal functions listed below on or off. Use the [­/NO] and [+/YES] buttons to turn backup "On" or "OFF". The default backup mode is "OFF". · Left Pedal Mode · Sustain Sample Depth (CLP-950) CLP-950/930 36 Connecting to a Personal Computer Although the Clavinova can be connected to a personal computer via the MIDI IN/OUT connectors and a MIDI interface, the TO HOST connector and HOST SELECT switch allow direct connection to Apple Macintosh or IBM-PC/AT personal computers for sequencing and other music applications without the need for a separate MIDI interface. "The Clavinova-Computer Connection" is a supplementary guidebook that describes, for beginners, what you can do with your Clavinova and a personal computer and how to set up a Clavinova-Computer system (the manual is not written for any specific models). The document is available as a PDF file (in English) at the following Internet address: Clavinova Home Page: http://www. yamaha. co. jp/english/product/cl/ Yamaha Manual Library (Electronic Musical Instruments) http://www2. yamaha. co. jp/manual/english/ NOTE · When connecting the Clavinova to a personal computer, first turn the power to both the Clavinova and the computer OFF before connecting the cable and setting the HOST SELECT switch. After connecting the cable and making the appropriate HOST SELECT switch setting, turn the power to the computer on first, then turn on the Clavinova. · When not using the [TO HOST] terminal of the Clavinova, make sure the cable is disconnected from the [TO HOST] terminal. If the cable is left connected, the Clavinova may not function properly. · " HS(" will appear in the display if the host computer is not turned on, the connecting cable is not properly connected, the HOST SELECT switch is not in the proper position, or the MIDI driver or MIDI application is not active. No Sound When the Power is Turned ON Is the AC plug properly connected to the Clavinova and an AC wall outlet?Is the CLP-950 speaker cord properly plugged into the connector?(page 50) Is the MASTER VOLUME control turned up to a reasonable listening level?Also make sure that a pair of headphones is not plugged into the PHONES jack, and that the Local Control (page 34) is ON. The Damper Pedal Doesn't Work If the damper pedal doesn't work, or notes are sustained even when the pedal is not pressed, make sure that the pedal cord is properly plugged into the main unit (page 58: CLP-930, page 50: CLP-950). The Clavinova Reproduces Radio or TV Sound This can occur if there is a high-power transmitter in your vicinity. Intermittent Static Noise This is usually due to turning ON or OFF a household appliance or other electronic equipment which is fed by the same AC mains line as your Clavinova. Interference Appears On Radio or TV Sets Located Near the Clavinova The Clavinova contains digital circuitry which can generate radio-frequency noise. The solution is to move the Clavinova further away from the affected equipment, or vice versa. Noise is heard from the Clavinova's speakers. The noise may be due to interference caused by the use of a mobile phone in close proximity to the Clavinova. [. . . ] 17, 200, 28230 Las Rozas (Madrid) Spain Tel: 91-201-0700 KOREA Cosmos Corporation 1461-9, Seocho Dong, Seocho Gu, Seoul, Korea Tel: 02-3486-0011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de Mexico S. A. De C. V. , Departamento de ventas Javier Rojo Gomez No. 1149, Col. Tel: 686-00-33 GREECE Philippe Nakas S. A. Navarinou Street 13, P. Code 10680, Athens, Greece Tel: 01-364-7111 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. [. . . ]