User manual YAMAHA CLP-705E

[. . . ] q 32-note polyphony permits use of the most sophisticated playing techniques. q Piano-like touch response -- adjustable in 3 stages -- provides extensive expressive control and outstanding playability. q Dual play mode allows 2 voices to be played simultaneously. q A number of built-in effects for wide-ranging sonic versatility. [. . . ] (C4 ~ D#5) For OMNI mode q MIDI Transmit Transpose This function allows the MIDI note data transmitted by the Clavinova to be transposed up or down in semitone increments by up to plus or minus 6 semitones. The pitch of the Clavinova itself is not affected. Setting the MIDI Transpose Function MIDI/ TRANSPOSE F#5 C6 F#6 -6 -4 -2 -5 -3 -1 0 13 24 5 6 Z Press and hold the [MIDI/TRANSPOSE] button. X Press the key on the keyboard corresponding to the desired amount of transposition. * C Release the [MIDI/TRANSPOSE] button. * Keys F#5 through F#6 on the keyboard are used to set the MIDI transmit transpose function as shown in the illustration to the left. Note: When the power is turned ON, MIDI transmit transpose is set to 0 (no transposition). 17 MIDI Functions Other MIDI Functions The MIDI functions listed to the right are engaged by holding down the [MIDI/TRANSPOSE] button and pressing the corresponding voice selector. Full details are given in the following pages. MIDI FUNCTION CHART Function Local Control ON/OFF Program Change ON/OFF Control Change ON/OFF Multi-Timbre Mode MIDI Split & Left Local OFF MIDI Split & Right Local OFF Panel Data Transmit CLP-705E Voice Selector [PIANO 1] [PIANO 2] [PIANO 3] [CLAVINOVA TONE ] [E. PIANO 1] [E. PIANO 2] [HARPSICHORD] q Local Control ON/OFF "Local Control" refers to the fact that, normally, the Clavinova keyboard controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is "Local Control ON" since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the Clavinova keyboard does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI IN connector. When using the DOM-30 Disk Orchestra Module with the Clavinova, for example, Local Control should be turned OFF when recording using the DOM-30 voices only, and ON when recording the Clavinova voices while listening to playback of the DOM-30 voices. MIDI/ TRANSPOSE PIANO 1 PIANO 2 PIAN 3 Z Hold down the [MIDI/TRANSPOSE] button. If the PIANO 1 LED is lit when the [PIANO 1] voice selector is pressed, you have turned local control OFF. The MIDI split mode is useful if, for example, you want to play a piano (Clavinova) voice with the right hand while playing a synthesizer bass line or string section with the left hand. When the MIDI split mode is activated, notes played on the left-hand section are transmitted via the Clavinova MIDI OUT connector on MIDI channel 2. Notes played on the right-hand section are transmitted on the "basic channel" (i. e. the channel set using the MIDI channel selection function described previously). MIDI OUT OPTIONAL IN L R LINE OUT R L MIDI IN DOM-30 Clavinova (Set to receive on MIDI channel 2) ANO 3 CLAVINOVA E. PIA 2 Z Press the [E. PIANO 1] voice selector while holding down the [MIDI/ TRANSPOSE] button. The E. PIANO 1 LED will flash. MIDI/ TRANSPOSE X While still holding the [MIDI/TRANSPOSE] button, press the key on the keyboard at which you want to set the split point. The E. PIANO 1 LED will light continuously. The split-point becomes the first key of the left-hand section. SPLIT POINT w C Release the [MIDI/TRANSPOSE] button. V To return to the normal full-keyboard mode, hold the [MIDI/TRANSPOSE] button and press the [E. PIANO 1] voice selector, then release both buttons. Note: When the power is turned ON the default split point key -- F#2 -- will be automatically selected. If a new split point is selected it remains active until the power is turned OFF or a different split point is selected. Left-hand section plays a DOM-30 bass voice. Right-hand section plays a Clavinova piano voice. q The MIDI Split & Right Local Off Mode In the CLP-705E either the right- or left-hand section of the keyboard can be assigned to control an external keyboard or tone generator. Assigning the left-hand section to external tone generator control was described in the previous section. [. . . ] If you should move, or if any doubt exists about the supply voltage in your area, please contact your dealer for supply voltage verification and (if applicable) instructions. The required supply voltage is printed on the name plate. For name plate location, please refer to the graphic found in the Special Message Section of this manual. 2. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by the manufacturer. If a cart, rack, or stand is used, please observe all safety markings and instructions that accompany the accessory product. 9. The power supply cord (plug) should be disconnected from the outlet when electronic products are to be left unused for extended periods of time. [. . . ]