User manual YAMAHA CP-30

[. . . ] We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This product MAY contain a small nonrechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. [. . . ] Recording will now start. NOTE If a Preset Drum Pattern or a Wave file has been set as the Performance's backing track, it will not playback during recording. Quick Start Guide 6 Press the [ ] (Stop) button. Recording will end and the Performance screen will be displayed. Furthermore, the recorded User Song will be automatically set as the backing track for the current Performance. NOTICE You should never turn off your CP5 or CP50 while the message "Please keep power on. . . " is displayed on-screen. If this precaution is not observed, the content of User Memory may be lost and system data may become corrupted, preventing your CP5 or CP50 from operating normally the next time it is turned on. 7 Press the [ / ] (Play / Pause) button to listen to your recording. You can stop playback at any time by pressing the [ ] (Stop) button. HINT If you accidentally recorded to a User Song already containing data, you can easily return the User Song to its original condition. The correct way to do so is as follows. 1 2 3 Press the [REC] button to call up the Record screen, and then press the [4] button to jump to Page 4. You will be asked to confirm that you wish to proceed. The most-recent recording will be cancelled and the User Song will be restored to its original condition. 42 CP5/CP50 Owner's Manual Recording Keyboard Performances Recording a Wave File 1 2 3 Ensure that the USB flash-memory device to which you wish to record has already been plugged into the stage piano's USB TO DEVICE port. Press the [ PAGE] or [1] button to ensure that Page 1 is displayed. Then, turn Knob 1 to select "Wave" (i. e. , a Wave file). A name with which to save the Wave file will be automatically assigned. 4 If necessary, press Knob 3 to specify a different name. Meanwhile, when shutting down your system, start by turning the volume of all devices fully down, and then turn off devices in the reverse order to turning on. Playing a Synth from the Stage Piano When your CP5 or CP50 is connected to a MIDI instrument such as a synthesizer or tone-generator module and settings are configured as described below, you can use the stage piano's keyboard to play the other instrument. MIDI [OUT] connector MIDI [IN] connector Quick Start Guide CP5 MIDI keyboard or synthesizer (such as the MOTIF XS) With this type of connection, the same MIDI channel must be used by the stage piano and the other instrument to send and receive, respectively. While your stage piano's keyboard can be used in this type of situation to play its own sounds and those of the other instrument simultaneously, it is also possible to assign individual sounds to the keyboard in a number of different ways so that they can be played independently. The procedure for doing so is described below. If, however, you do not wish to split up the keyboard in this way, you can instead navigate to Page 5 of the Utility screen (See the Reference Manual pdf document for more details) after completing Steps 1 and 2 below and set the MIDI channel for transmission so as to match the other instrument's receive channel. 1 2 3 4 5 6 7 Navigate to Page 6 of the Utility screen by pressing the [UTILITY] button, and if necessary, the [6] button. (See the Reference Manual pdf document for more details. ) Turn Knob 2 to set the In/Out parameter (MIDI In/Out) to "MIDI". With this setting, MIDI data will be exchanged with other devices via the stage piano's MIDI connectors (instead of via USB). Press the [STORE] button to store this setting. Utility settings are stored within User Memory as part of the stage piano's system settings. For details regarding the storing procedure, refer to page 50. Press the [EXIT] button to return to the Performance screen, and then select the Performance you would like to play (page 23). Navigate to Page 2 of the Common Settings screen by pressing the [COMMON] button, and if necessary, the [2] button. [. . . ] 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 Yamaha Musica Italia S. P. A. Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 Yamaha Música Ibérica, S. A. [. . . ]