User manual YAMAHA CP-300

[. . . ] OWNER'S MANUAL STAGE PIANO EN SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. [. . . ] The following steps are detailed instructions for Step 4 (in the Basic Operation above). 4-1 4-2 Name the Performance file as described in the "Perf. Name" section (page 78). Press the B [+ (YES)] button to execute the job. After you rename a Performance, the CP300 sorts Performance files alphabetically and renumbers them. CAUTION Never attempt to turn the [POWER] switch OFF while the "Executing" message is shown in the display. Turning the power off in this state may cause the Performance file to be deleted. 80 CP300 Owner's Manual Handling Song Files File displays (accessed via the [SONG FILE] button) enable you to handle and organize files (e. g. , save, delete and rename Song files) and change characters from the display. Setting Saving recorded Songs to the CP300's storage memory Deleting a Song from the CP300's storage memory Renaming Song files Changing the type of characters in display Parameter name SaveToMemory DeleteSong RenameSongs CharacterCode Page 82 83 83 84 Terminology Song file: On the CP300, a Song file includes both Song data and a Song number. Song File--Basic Operation Reference A message (information or confirmation prompt) sometimes appears on the display to facilitate operation. Refer to the "Message List" on page 94 for an explanation of each message, along with troubleshooting information and the appropriate actions to take. 2, 3 TRACK MASTER PERFORMANCE TRANSPOSE 1 2 3-16 SONG FILE MIDI OUT PANEL LOCK SONG SELECT MASTER EDIT PERFORM. FILE REC STOP PLAY/PAUSE SONG SETTING DOWN UP 3 A 4 B CONTRAST GRAND PIANO 1 GRAND PIANO 2 MONO PIANO E. VIBES VOICE EDIT SPLIT REVERB CHORUS SPEAKER MIDI SETTING NO YES 1 ORGAN 1 2 ORGAN 2 3 HARPSI. 4 STRINGS 5 CHOIR/PAD 6 GUITAR 7 BASS 8 XG VARIATION MASTER EQ EDIT CLICK OTHER SETTING DEMO EXIT NEW SONG SYNCHRO START TEMPO C D 9 10 11 12 13 14 15 16 SONG VOICE/PERFORMANCE 1 4 Prepare the file(s) for handling. 4 5 1 When using the Save To Memory, Rename Song and Delete Song parameters: Use the SONG SELECT [N] [O] buttons to select the target Song. When using the Character Code parameter: No operations necessary; go on to Step 2 below. 2 3 Press the [SONG FILE] button to access the Song File settings. Select the desired item by pressing the [SONG FILE] button or by using the A [­][+] buttons. A B RenameSong Execute?--> M-001:NewSong. MID C NO YES D To close the Song File menu, press the [EXIT] button once or twice. 4 5 Press the B [­ (NO)][+ (YES)] to D [­][+] button to execute the job or change the value. For details about each operation, refer to pages 82 ­ 84. Press the [EXIT] button to exit the Song File settings. CP300 Owner's Manual 81 Handling Song Files Saving Recorded Songs to the CP300's Storage Memory--Save To Memory This allows you to save recorded Songs to the CP300's storage memory. Keep in mind that when you turn off the power to the CP300, your recorded Song data will be lost. To permanently save the recorded Song, you must save it to the CP300's storage memory. Current memory This is a temporary memory area where you can temporarily place and edit the currently selected Song before playback or recording. Storage memory This is a memory area that provides space for saving recorded Songs that would normally be lost when you turn off the power. A recorded Song Save Memory Song Preset Song A B SaveToMemory Execute?--> M-001:NewSong. MID C NO YES D Reference The Save To Memory operation is not available for Preset Songs. For basic operation instructions, refer to page 81. The following steps are detailed instructions for Step 4 (in the Basic Operation above). 4-1 Name the Song. To move the cursor (small underline), use the C [­][+] buttons. To insert a space, press the C [­][+] buttons simultaneously. To select a character on the cursor, use the D [­][+] buttons. To delete a character, press the D [­][+] buttons simultaneously. You can use up to 58 characters for a Song name. If the name is longer than the display, use the C [­][+] buttons to move the cursor and scroll through the name. You can change the type of characters on the display using the "Character Code" parameter (page 84). 4-2 Press the B [­ (NO)][+ (YES)] button to execute the job. Press the B [+ (YES)] button to display the confirmation prompt ("Sure?"). [. . . ] 09300, México, D. F. , México Tel: 55-5804-0600 SPAIN/PORTUGAL Yamaha-Hazen Música, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 KOREA Yamaha Music Korea Ltd. 16F 23-8 Yoido-dong, Youngdungpo-ku, Seoul, Korea Tel: 02-3770-0660 BRAZIL Yamaha Musical do Brasil Ltda. Reboucas 2636-Pinheiros CEP: 05402-400 Sao Paulo-SP. [. . . ]