User manual YAMAHA CP-70D

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. [. . . ] model only) Automatically detects FM and AM HD Radio stations and analog FM radio stations and registers them as preset stations. APPENDIX Format Channel Format of digital audio signals. The number of input signal channels (front/surround/LFE). For example, if input signal channels are 3 front channels, 2 surrounds and LFE, "3/2/0. 1" is displayed. If a channel that cannot be expressed as the above, a total number of channels such as "5. 1ch" may be displayed. Clear Preset Input source: TUNER, XM, SIRIUS Clears preset station (TUNER: page 31, XM: page 36, SIRIUS: page 40). Parental Lock Input source: SIRIUS English Set the Parental Lock (page 41). 49 En Setting the option menu for each input source (Option menu) Shuffle Input source: iPod (DOCK), USB Choices: iPod (DOCK): Off*, Songs, Albums USB: Off*, On Selecting a video signal to be output during an audio reproduction This function enables this unit to output video signals when "AUDIO 1", "AUDIO 2" or "MULTI CH" is selected as the input source. Follow the procedure below to select the video to be output during an audio reproduction. Changes the shuffle playback style. Repeat Input source: iPod (DOCK), USB Choices: Off*, One, All Changes the repeat playback style. Connect / Disconnect Input source: BLUETOOTH (DOCK) 1 Connects to or disconnects from a Bluetooth component. Pairing Input source: BLUETOOTH (DOCK) Rotate the RINPUT selector (or press dInput selection key) to select "AUDIO 1", "AUDIO 2" or "MULTI CH" as the input source. The Option menu for the selected input source is displayed. Press jCursor k / n to select "Video Out" and then press jENTER. Performs pairing of this unit and a Bluetooth component (page 45). Video Out Input source: AUDIO 1/2, MULTI CH Choices: AV1 to AV6, V-AUX, Off* 2 3 Specifies a video signal to be output during an audio reproduction. You can create a lively sound field (with a high reverberant sound level) as you increase the value, and a dead sound field (with a low reverberant sound level) as you decrease the value. Creating either a lively sound field or a dead sound field in an actual music hall is determined by the acoustic absorption characteristics of reflection surfaces. A dead sound field is created when the attenuation time is short while a lively sound field is created when the attenuation time is long. Original source sound Early-reflected sound Small = 0. 1 Large = 2. 0 Parameters for defining attenuation characteristics of early-reflected sound Liveness / P. Back Liveness Adjustable range: 0 to 10 Time Delay Sound source Delay Time Adjusts the attenuation of reflected sound. You can create a lively sound field (with a high reverberant sound level) as you increase the value, and a dead sound field (with a low reverberant sound level) as you decrease the value. Creating either a lively sound field or a dead sound field in an actual music hall is determined by the acoustic absorption characteristics of reflection surfaces. A dead sound field is created when the attenuation time is short while a lively sound field is created when the attenuation time is long. Source sound Live Level Reflecting Level Level Dead Small = 1ms Level Large = 99ms Time Time y · We recommended that you adjust the size of corresponding sound field when you adjust the delay time. Parameters for specifying room size Small reflected sound Large reflected sound Room Size / P. Back Room Size Adjustable range: 0. 1 to 2. 0 Produces different senses of sound expansion according to room sizes specified. In a large size room such as a music hall, the duration from when reflected sound is heard until when the next reflected sound is heard is long. Thus, different senses of sound expansion can be created by changing the duration. When this parameter is set to 2. 0, each side of the room is defined as twice larger than the original room size. Small = 0 Large = 10 52 En Editing surround decoders/sound field programs Parameters for adjusting reverberant sound Reverb Level Adjustable range: 0 to100% Reverb Time Adjustable range: 1. 0 to 5. 0s Reverb Time parameter adjusts the attenuation time of the rear reverberant sound based on the time that about 1kHz reverberant sound takes for 60dB of attenuation. [. . . ] 48 Volume, Function Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 X XM indicator, front panel display . . . . . . . . . . . . . . . . . . . 6 XM jack, rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 XM Satellite Radio tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]