User manual YAMAHA CP30E

[. . . ] We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This product MAY contain a small nonrechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. [. . . ] The following steps are detailed instructions for Step 4 (in the Basic Operation above). 4-1 Use the C [­][+] buttons to select the Performance file to be deleted. 4-2 Press the B [+ (YES)] button to execute the job. Press the B [+ (YES)] button to display the confirmation prompt ("Sure?"). To proceed, press the B [+ (YES)] button again. An "Executing" message appears and the data is saved. When the operation is complete, a "Completed" message appears briefly, then returns to the previous display. To cancel the operation, press the B [­ (NO)] button instead of the B [+ (YES)] button. Reference CAUTION Never attempt to turn the [POWER] switch OFF while the "Executing" message is shown in the display. Turning the power off in this state may damage the data of the Performance. n The Performance file in the current memory cannot be deleted. After you delete a Performance file, the CP30E automatically updates the Performance file numbers. Renaming a Performance File--Rename File You can rename a Performance file in the storage memory. You cannot change the Preset Performance file. A B RenameFile Execute?--> 001. MyPerformance. PER C NO YES D For basic operation instructions, refer to page 76. To proceed, press the B [+ (YES)] button again. An "Executing" message appears and the data is saved. When the operation is complete, a "Completed" message appears briefly, then returns to the previous display. To cancel the operation, press the B [­ (NO)] button instead of the B [+ (YES)] button. CAUTION Never attempt to turn the [POWER] switch OFF while the "Executing" message is shown in the display. Turning the power off in this state may cause the recorded Song to be deleted. The Song is automatically numbered as "Mxx, " where "M" stands for "Memory" and "xx" is a number. If storage memory contains one or more Songs, and you save a new Song, the CP30E automatically sorts the Songs alphabetically and renumbers them. 82 CP30E Owner's Manual Handling Song Files Deleting a Song from the CP30E's Storage Memory--Delete Song This allows you to delete a Song from the CP30E's storage memory. It is not possible to delete a Preset Song. A B DeleteSong Execute?--> M-001:NewSong. MID C NO YES D For basic operation instructions, refer to page 85. The following steps are detailed instructions for Step 4 (in the Basic Operation above). 4-1 4-2 Use the C [­][+] buttons to select a Song to delete. Press the B [+ (YES)] button to execute the job. Press the B [+ (YES)] button to display the confirmation prompt ("Sure?"). To proceed, press the B [+ (YES)] button again. [. . . ] Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México S. A. [. . . ]