User manual YAMAHA CP60M

[. . . ] Although StageMix is focused on the requirements for adjusting monitor mixes on stage, its range of features is continually expanding, allowing it to be used for a wider variety of remote control functions. Yamaha Commercial Audio LS9 StageMix V3. 0 User Guide CONTENTS Page 1. 0 2. 0 3. 0 System Requirements Wi-Fi Settings Getting Started 3. 1 LS9 Network Setup 3. 2 iPad Wi-Fi Settings 3. 3 StageMix Setup 3. 3. 1 OFFLINE DEMO Mode 3. 3. 2 Configure StageMix to Work with an LS9 Console 3. 3. 3 Select a Mixer and Begin Working 3. 3. 4 Edit Mixer Configurations Mixer Window 4. 1 Channel Bank Navigation 4. 2 Layer Navigation 4. 3 Channel Names and Colors 4. 4 Faders 4. 4. 1 Long Faders 4. 4. 2 Navigation in Long Faders Mode 4. 5 Channel ON 4. 6 CUE 4. 7 Master Bank 4. 8 HA GAIN 4. 8. 1 Input Port 4. 8. 2 Phantom Power 4. 8. 3 Phase 4. 9 SENDS ON FADERS 4. 9. 1 Mix Send Levels 4. 9. 2 Mix Sends ON 4. 9. 3 Stereo Mix Pan EQ & PAN 5. 1 EQ 5. 1. 1 EQ Curve in Mixer Window 5. 1. 2 Selecting PEQ or GEQ 5. 1. 3 Accessing the EQ Editing Screens 5. 2 PARAMETRIC EQ EDITING 5. 2. 1 HPF 5. 2. 2 EQ Bands 1 & 4 5. 2. 3 EQ ON 5. 2. 4 EQ RESET 5. 2. 5 EQ Type 5. 3 GRAPHIC EQ EDITING 5. 3. 1 Navigation in the GEQ Overview Section 4 4 5 5 5 6 7 7 8 8 9 9 9 10 10 10 11 11 11 12 13 13 13 14 14 15 15 15 17 17 17 18 18 19 20 20 21 21 21 22 22 Page 2 4. 0 5. 0 Yamaha Commercial Audio LS9 StageMix V3. 0 User Guide 22 23 23 23 23 23 23 24 24 25 25 26 26 27 27 28 28 28 29 29 29 29 30 31 31 31 31 32 32 32 32 32 32 33 33 33 34 34 34 35 5. 4 6. 0 5. 3. 2 Rack Position 5. 3. 3 GEQ Type 5. 3. 4 Editing GEQ Bands 5. 3. 5 Navigation in the GEQ Editing Section 5. 3. 6 GEQ ON 5. 3. 7 GEQ FLAT 5. 3. 8 Copy/Paste PAN TO STEREO BUSSES 5. 4. 1 Balance UTILITY 6. 1 Mute Group Masters 6. 2 Tap Tempo 6. 2. 1 Multi-Select SCENE MEMORY 7. 1 Current Scene 7. 2 Decrement / Increment Scene 7. 3 Scene List 7. 4 Scene Range 7. 5 Selected Scene 7. 6 Store Scene 7. 7 Undo Store 7. 8 Recall Scene 7. 9 Undo Recall SETUP 8. 1 Fader Delay 8. 2 Input Meter Point 8. 3 Output Meter Point 8. 4 Filled EQ Graph 8. 5 Enable Inc/Dec Scene Recall 8. 6 Show Send Levels in Meter Bridge 8. 7 Set EQ band to 0dB with Double-Tap 8. 8 Channel Select ­ StageMix Follows Console 8. 9 Channel Select ­ Console Follows StageMix Troubleshooting 9. 1 No Wi-Fi Available 9. 2 Connection Error 9. 3 Connection Lost 9. 4 Graphic EQ Doesn't Affect the Sound 9. 5 Problems Moving Multiple Faders 9. 6 StageMix Facebook Page 7. 0 8. 0 9. 0 Page 3 Yamaha Commercial Audio LS9 StageMix V3. 0 User Guide 1. 0 System Requirements Apple iPad (1st generation iPad or iPad 2, or 3rd generation iPad) Yamaha LS9 digital mixing console Wi-Fi access point (preferably with 802. 11n, 5GHz capability, though 2. 4GHz and 802. 11g will also work) CAT5 cable (to connect the console to a Wi-Fi access point) 2. 0 Wi-Fi Settings Configure the Wi-Fi access point, following the manufacturer's instructions. No special settings are needed, but using security such as WPA is highly recommended, to prevent unwanted devices from joining the network. Here are some suggested settings to assist less experienced Wi-Fi users: 1. Give the wireless network a name (this is the "SSID"). [. . . ] If a GEQ curve is displayed, the GEQ editing screen will be accessed. Note: the EQ editing screen will be accessed when the finger is removed from the curve. Swipe gestures will not cause the Editing screen to be accessed. Page 18 Yamaha Commercial Audio LS9 StageMix V3. 0 User Guide 5. 2 PARAMETRIC EQ EDITING The current channel's Name, Color, Fader, Level Meters, [ON] and [CUE] buttons are shown in the left column. At the bottom-left, there are "previous" and "next" arrow buttons for navigating to different channels. Note: the In/Out meters display the levels going In and Out of the EQ section. One band of Parametric EQ can be adjusted at a time. Press one of the green circles to select the band, and it will be highlighted yellow. EQ bands in StageMix are labelled as follows: HP = HPF (input channels only) 1 = Low Band 2 = Low-Mid Band 3 = High-Mid Band 4 = High Band The current values for Freq, Gain and Q will be displayed for the currently selected EQ band. Gain and Frequency can be adjusted by dragging the circle around the graph. Q is adjusted by using the iPad's "pinch" gesture: hold one finger (or thumb) on the screen while moving another finger closer to or further away from the first. Page 19 Yamaha Commercial Audio LS9 StageMix V3. 0 User Guide TIP___________________________________________________________ The most comfortable and accurate way of adjusting Q is to use a vertical pinch movement with the thumb and forefinger. ______________________________________________________________ While an EQ band is being moved, the parameter value will turn yellow to indicate that it has changed. The little arrows show which direction the band should be moved to return to its previous position. In some cases, it may be necessary to adjust the gain without altering the frequency. White dots represent the position for each of the 31 bands. (These dots change to yellow and become larger when they are being touched in the Editing section below. ) The current channel's Name, Color, Fader, Level Meters, [ON] and [CUE] buttons are shown in the left column. At the bottom-left, there are "previous" and "next" arrow buttons for navigating to different channels. Pressing these buttons will only access other channels that have GEQs assigned to them. Note: the In/Out meters display the levels going In and Out of the EQ section. 5. 3. 1 Navigation in the GEQ Overview Section Tapping anywhere in the GEQ Overview will cause the GEQ sliders in the Editing section to jump to that range of the GEQ (represented by a light grey area in the overview). Touching the selected range in the Overview and dragging it left / right will scroll the range of GEQ sliders. 5. 3. 2 Rack Position In the upper-left area of the GEQ screen, the Rack position of the channel's GEQ will be displayed. In the screenshot above, this GEQ is located in rack position 1B. Page 22 Yamaha Commercial Audio LS9 StageMix V3. 0 User Guide 5. 3. 3 GEQ Type Next to the Rack position, the type of GEQ is identified as either "31 Band" or "Flex 15". In the case of a Flex 15 GEQ, a larger-sized number indicates the remaining number of available bands for that GEQ. As each band is adjusted away from 0dB, the number of available bands will decrease. [. . . ] When it is off, only the outline of the graph will be shown. Enable Inc/Dec Scene Recall When this preference is ON, buttons will appear in the Scene Memory screen that allow instant recall of the Next or Previous Scene Memory. Show Send Levels in Meter Bridge When this preference is ON, the send levels for the currently selected "MIX ON FADERS" will appear in the "Navigation/Meter Bridge" in "SENDS ON FADERS" mode. If this preference is OFF, the input levels will be displayed. [. . . ]