User manual YAMAHA CPX/APX700

[. . . ] SPECIFICATIONS ELECTRIC ACOUSTIC GUITAR Owner's Manual Thank you for choosing a Yamaha electric-acoustic guitar. In order to make the most of the advanced features and performance provided by your guitar, please read this manual carefully before using the instrument. System Pickup Pre-amplifier Controls Output jack Output impedance Power supply Battery life SYSTEM-56: Monaural 1 way Contact Pickup (installed inside of the body) VOL. , 3 Band (HIGH, MID, LOW) EQ control, AMF control Combination end pin/power switch 1 k 9V DC, S-006P (6F22) dry cell battery Approx. [. . . ] e Remove the old battery from the battery case, and insert the new battery making sure that the (+) and (­) terminals of the battery are positioned as shown in the illustration. Use only a DC9V, S-006P (6F22) or equivalent battery. r Slide the battery case back into the battery holder and press firmly so that the battery case locks into place. q w, r w OP EN Battery case E OP N e DC9V S-006P (6F22) r Sound Hole Cover (Accessory) Output Jack (with power switch function) Catch THE CONTROLS q VOL. (Volume) Control Adjusts the overall output volume level. * Make sure that the VOL. is turned to "0" before connecting or disconnecting. USING THE SOUND HOLE COVER e Feedback often occurs when controls are boosted on the electric acoustic guitar to match the volume of other instruments when playing in a band. When the instrument is used under the conditions described above, the Sound Hole Cover should be inserted into the sound hole. With the Sound Hole Cover in place, feedback is effectively reduced. wq w BATT. (Battery Check) Indicator This indicator will light when the battery needs to be replaced. Please replace the battery as soon as possible when the BATT. indicator lights. USING THE TUNER The guitar is equipped with an A4=440Hz standard pitch tuner. The tuner's circuitry is independent from the guitar's output circuit so switching the tuner ON/OFF will have no affect on sound output. While the tuner activates the and lamps light alternately. [. . . ] HIGH : Boosts or cuts the level of the high frequencies. r AMF Control Sets the center frequency of the band of frequencies affected by the MID equalizer control. The range is from 80 Hz to 10 kHz. * This control has no effect when the MID equalizer control is set to its center ("0") position. t Tuner Switch Switches the tuner ON/OFF. y Tuner Display Displays tuner information. [. . . ]