User manual YAMAHA CR-220

[. . . ] Please record the serial number of this unit in the space below. Model: Serial No. : The serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place for future reference. 14 15 1 2 3 4 5 6 Read Instructions ­ All the safety and operating instructions should be read before the unit is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] · Total remaining time on the disc will not be displayed during random-sequence play. The current track is played repeatedly. REPEAT 1 DISC The current disc is played repeatedly. * In random-sequence play mode, all randomly sequenced tracks are played repeatedly in the different order. REPEAT ALL DISC All tracks on all discs are played repeatedly. To cancel repeat play mode Press REP successively until "REPEAT" disappears from the display. E-11 COMPACT DISC PLAYER OPERATIONS Program play By creating a program, you can enjoy listening to your favorite discs or tracks in any desired order. As many as 20 tracks can be programmed in sequence. 5 6 Repeat steps 3 and 4 to program more discs and tracks. Press 6 to start program play. To stop program play mode Press 7. POWER / CT TIMER CLOCK SET Notes DISC 1 ­ 3 · When you change to program play mode from another play mode, press 7 and PGM ("PROGRAM" appears in the display), then press 6 to start program play. · You cannot program a track that is not included in a disc. · ¢ or 4 can be used during program play to skip to tracks within the program. RDS TIME PTY REP RT EDIT TUNING FM/AM ST/MONO DISC 1 MEMORY PGM PRESET 2 3 7 / TUNER CD 1 2 3 4 5 6 4/¢ PGM +10 9 0 6 REC/ PAUSE / 7 REC/ MUTE 8 CD SYNC To check program data 1. Each time you press this button, the disc and track number and the program number are displayed in the order of the program. TAPE MD INPUT SLEEP MUTE VOLUME ­ + To change program data 1. Follow the preceding procedure described in "To check program data. " Display the track number to be corrected by pressing PGM. Press DISC 1 ­ 3 to select the desired disc, and press the number button of the desired track. You can also select a preset number by using PRESET //?. To preset stations 1 Tune in a desired station. (Refer to the previous page for the tuning procedure. ) Press MEMORY. TUNED MEMORY STEREO 2 CH MHz The frequency to preset Preset number flashes. E-14 Getting Started Playing CDs RECEIVING RDS STATIONS (U. K. and Europe models only) What is RDS? RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal. RDS data contains various information, such as Program Identification (PI), Program Service name (PS), Program Type (PTY), Traffic Program (TP), Radio Text (RT), Clock Time (CT), etc. The unit is compatible with the RDS system for PS, PTY, TP, RT, and CT. Note · RDS may not work properly if the station you are tuned to is not transmitting the RDS signal properly or if the signal strength is weak. · Some FM stations do not offer RDS service. Of those that do, not all provide the same types of services. Check with your local radio stations for details on RDS services in your area. To search the station with RDS data 1 2 3 Press FM/AM so that "FM" appears in the display. Within 5 seconds (during flashing "RDS" in the display), press / (for higher frequency) or ? [. . . ] 40 µW* This output is the value measured at a distance of about 200 mm from the objective lens surface on the Optical Pick-up Block. Tuner section Tuning range FM [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . 87. 5 ­ 108. 0 MHz [U. K. , Europe, Australia, Singapore, and General models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]