User manual YAMAHA CRW4416 FIRMWARE FOR CRW4416S WINDOWS

[. . . ] IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. [. . . ] For details, refer to the instruction for the CD writing software. For Mac OS X 1 Select Go in the menu bar, then Applications, Utilities, Apple System Profiler, and Device and Volume tab. 20 2 Check that "CRW4416" is shown in the "FireWire" item. "CRW4416" Note · If the "FireWire" item is not shown, the FireWire interface of the computer is not recognized by the Mac OS X. Contact the manufacturer of the computer. · If "CRW4416" is not shown even with the "FireWire" item shown, the CRWF1DX drive is not recognized by Mac OS. In such a case contact the store of purchase or your nearest Yamaha dealer (listed at the back of this manual). 10 Install the CD writing software. Install the CD writing software. For details about how to install the CD writing software, refer to the instruction for it. "CRW-F1E" (device name) corresponding to the CRW4416 drive (product name) will be shown on your CD writing software when the drive is recognized by the CD writing software properly. For details about how to check recognition of the CRW4416 drive with the CD writing software, refer to the instruction for the CD writing software. 21 Preparing the CRW4416 Drive (Macintosh ­ USB) Connect with USB for Macintosh Note Place the CRW4416 drive horizontally. 1 2 Remove all additional USB devices connected to the computer, and turn on the computer. Be sure that the power switch of the CRW4416 drive is turned off (STANDBY). 3 Set the 1394/USB selector of the CRW4416 drive to USB. Note Be sure to set the 1394/USB selector while the power switch of the CRW4416 is turned off (STANDBY). Interface cannot be switched if the power switch is on. 22 4 Connect the included USB cable to the CRW4416 drive. The included USB cable has two types of plugs: Series A plug and Series B plug. Series A plug Series B plug Insert the Series B plug (with a quadratic section) of the included USB cable to the USB port of the CRW4416 drive. USB cable (included) USB port Series B plug 5 Connect the included AC adapter to the DC-IN connector of the CRW4416 drive. DC-IN connector 23 Preparing the CRW4416 Drive (Macintosh ­ USB) 6 Connect the included power cable to the AC adapter (). Connect the other end of the power cable to the wall socket (). Power cable (included) Note · Use the included AC adapter only. · The AC adapter may become warm during use under normal conditions. Connect the other end of the power cable to the wall socket (). Power cable (included) Note · Use the included AC adapter only. · The AC adapter may become warm during use under normal conditions. · The AC adapter consumes 1 W of power while connected to the wall socket even if the power switch of the CRW4416 drive is turned off. Remove the power cable from the wall socket when not using the CRW4416 drive for a prolonged period. 31 Preparing the CRW4416 Drive (Windows ­ IEEE1394) 7 Turn on the power switch of the CRW4416 drive. Lights Note When turning on the CRW4416 drive, be sure that the power LED lights. 3) 8 Connect the included IEEE1394 cable to the computer. IEEE1394 port IEEE1394 cable (included) Note To connect multiple IEEE1394 devices, refer to "Connecting Multiple IEEE1394 Devices. " (P. 61) 32 9 Check recognition of the CRW4416 drive. After connecting the CRW4416 drive to the computer, follow the steps below to check that the drive is recognized properly by the computer. For Windows XP 1 Select Start on the task bar, then Control Panel, System, Hardware tab, and Device Manager. Note If the System icon is not shown in the Control Panel window, click Switch to Classic View on the left side of the window. 2 Check that the following icons are shown. a: "YAMAHA CRW4416 IEEE 1394 SBP2 Device" in the "DVD/CDROM drives" item b: "IEEE 1394 Bus host controllers" c: "SBP2 Compliant IEEE 1394 device" in the "SBP2 IEEE 1394 Devices" item a b c The drive name is not shown or there is or mark. The CRW4416 drive has not been recognized properly. Check the cable connections and settings. Continued on next page 33 Preparing the CRW4416 Drive (Windows ­ IEEE1394/USB) For Windows 2000 Professional 1 Select Start on the task bar, then Settings, Control Panel, System, Hardware tab, and Device Manager. The Device Manager dialog box appears. 2 Check that the following icons are shown. a: "YAMAHA CRW4416 IEEE 1394 SBP2 Device" in the "DVD/CDROM drives" item b: "IEEE 1394 Bus host controllers" For Windows 98 Second Edition/Me 1 Select Start on the task bar, then Settings, Control Panel, System, and Device Manager tab. [. . . ] · Audio CDs that are created with Audio Master Quality Recording may not be played back on certain audio recorders and CD-R/RW drives. 59 Technical Notes CD-MRW (CD Mount Rainier ReWriting) This method is a new standard of packet writing for a CD-RW disc and supports defect control by the drive, background formatting, and disc ejecting during formatting. It enables you to use a CD-RW disc like a floppy disk. Note Formatting a CD-RW disc using CD-MRW reduces its storage capacity by about 150MB since CD-MRW requires exclusive disc space. Constant Linear Velocity (CLV) The disc rotation speed is adjusted to the data transfer rate while writing/reading data. Constant Angular Velocity (CAV) The data transfer rate is adjusted to keep the disc rotation speed while writing/ reading data. The Full CAV method employs CAV all through data writing/reading. Partial CAV The CAV method is employed for inner tracks of a disc and the CLV method for outer tracks while writing/reading data. IEEE1394 IEEE1394 is a global standard approved by Institute of Electrical and Electronics Engineers (IEEE). [. . . ]