User manual YAMAHA CRX-E400

[. . . ] GB CRX-E400 RX-E400 CDX-E400 Receiver/CD Player Récepteur/Lecteur CD OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING THIS UNIT 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, clean place away from direct sunlight, heat sources, vibration, dust, moisture or cold. In a cabinet, allow about 10 cm (4 in. ) of free space all around RX-E400 for adequate ventilation. [. . . ] · If there is no operation for about 20 seconds, this mode is cancelled and turns into the frequency display. If the station has PS data, it turns into the PS mode. Press FREQ/RDS again to restore the frequency display mode. 6 14 USING THE BUILT-IN TIMER USING THE BUILT-IN TIMER Before using the timer If you want to use the cassette deck, KX-E300 or the MD Recorder, MDX-E300 for timer play or recording, you must first make the connections as shown in "Connecting the system" on page 5. For details, refer to the instructions supplied with the MDX-E300 or KX-E300. 3. Timer REC Select the recording component by turning INPUT. If you like to enjoy timer play with TUNER or AUX, select "REC Mode OFF". (Example) English Timer play and recording By using the built-in timer, you can have the unit turn on at a specified time and begin playing or recording automatically. You can also specify the turn off time. DISPLAY HOUR MIN 4. ON Time "ON Time" appears on the display for a second, and changed to the time setting mode. Press MIN to set the minute. VOLUME NATURAL SOUND STEREO RECEIVER RX­E400 STANDBY/ON TIMER DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING MIN MAX TIMER ADJ BASS PHONES TIMER TREBLE HOUR BALANCE MIN INPUT 5. OFF Time Set the time the same way as above. If you set the ON time but not OFF time, the timer play or recording will finish automatically after an hour. Notes · The display mode will change in about 8 seconds. If the mode is changed before the setting is completed, call the mode again by pressing DISPLAY once or more. · If you select the input other than TUNER and AUX on "2. Timer REC" is skipped. ­ + ­ + L R TIMER INPUT 1 Press DISPLAY. Whenever DISPLAY is pressed, the display mode changes as follows: 1. Clock Time (TIMER on/off mode) If you have not set the clock yet "Set Clock" appears. You need to set the current time as described on page 6. 2 Press TIMER to complete the timer setting. If you continue using the system, press STANDBY/ ON to turn on this unit. To cancel the timer play setting Press DISPLAY to show the current time, then press TIMER so that "TIMER" goes off from the display. You can also cancel by pressing TIMER in standby mode. Note · In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock. 2. Timer Input Select the source to be played by turning INPUT. [. . . ] AC 110/120/220/240 V, 50/60 Hz Power consumption [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 W [U. K. , Europe, Australia and General models] . . . . . . . . . . . . . . . . . . . . . . 125 W Power consumption (standby mode) [U. S. A. [. . . ]