User manual YAMAHA CRX-E500

[. . . ] U CRX-E500 RX-E400 CDC-E500 Receiver/CD Player OWNER'S MANUAL SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 12 13 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 14 1 2 3 4 5 Read Instructions ­ All the safety and operating instructions should be read before the product is operated. [. . . ] If desired, adjust BASS, TREBLE, and BALANCE. BASS: Turn this control clockwise to increase (or counterclockwise to decrease) the low frequency response. TREBLE: Turn this control clockwise to increase (or counterclockwise to decrease) the high frequency response. BALANCE: Adjust the balance of the output volume from the left and right speakers to compensate for sound imbalance caused by the speaker location or listening room conditions. POWER 1 1 4 4 7 7 0 2 2 5 5 8 8 +10 3 3 6 6 9 5 6 +100 REP A MODE D RANDOM B TEXT/TIME PROG C DISC SKIP E TAPE DIRECTION PRESET TUNER PRESET MD CD TAPE AUX MD REC/PAUSE TAPE REC/PAUSE When you use headphones VOLUME %/fi MODE DUBBING START SLEEP DISPLAY Connect the headphones to the PHONES jack. You can listen to the sound to be output from the main speakers through the headphones. VOLUME When you have finished using this unit Press STANDBY/ON on the front panel again or POWER on the remote control to set this unit to the standby mode. Auto standby function This unit will be put automatically into the standby mode under the following conditions: · A component connected with a system control cable is selected as an input source. · The component connected to this unit is in stop mode and not operated for 30 minutes. 10 TUNING Listening to the radio You can find radio stations automatically and manually. AUTO/MAN'L PRESET/TUNING / Manual tuning 1 2 3 Follow steps 1 and 2 described in "Automatic tuning. " Press AUTO/MAN'L so that "AUTO" disappears from the display. Press PRESET/TUNING (For a higher (For a lower frequency) to select frequency) or your desired station. · Each time you press PRESET/TUNING or the frequency changes step by step. VOLUME NATURAL SOUND STEREO RECEIVER RX­E400 STANDBY/ON TIMER DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING MIN MAX TIMER ADJ BASS PHONES TIMER TREBLE HOUR BALANCE MIN INPUT , ­ + ­ + L R PRESET/BAND INPUT Automatic tuning 1 2 3 4 5 Select TUNER by turning INPUT so that the frequency of a radio station appears in the display. Press PRESET/BAND to select the reception band. Do not select the preset tuning mode (in which "PRESET" appears on the display). Press AUTO/MAN'L so that "AUTO" appears in the display. Press PRESET/TUNING (For a higher (For a lower frequency). frequency) or The unit starts searching for a station. STEREO TUNED AUTO When the unit finds a station, the unit stops searching and "TUNED" appears on the display. 6 If the located station is not the one you want, repeat steps 4 and 5 until a station you want is tuned. Notes · If automatic tuning search does not find the desired station, try manual tuning as described next. · When an FM stereo broadcast with sufficient signal strength is received, "STEREO" appears on the display and you can listen to stereo sound. 11 TUNING Presetting stations The unit can preset station frequencies selected by Automatic tuning or Manual tuning. With this function, you can select any desired station by pressing the corresponding preset station number. PRESET/TUNING / To preset stations automatically 1 2 Select TUNER as input source by turning INPUT. · The unit starts presetting stations, "AUTO" and "MEMORY" will flash on the display. Received stations are stored to A1, A2. . . A8 sequentially. After 40 stations or all FM and AM stations are stored, the display will show the preset station A1. VOLUME NATURAL SOUND STEREO RECEIVER RX­E400 To recall a preset station MAX STANDBY/ON TIMER DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING MIN TIMER ADJ BASS PHONES TIMER TREBLE HOUR BALANCE MIN INPUT Press TUNER and select the desired number by pressing PRESET/BAND and PRESET/TUNING / on the front panel or PRESET / , A/B/C/D/E and 1­8 on the remote control. POWER ­ + ­ + L R 1 2 2 5 5 8 8 +10 3 3 6 6 9 MEMORY PRESET/BAND INPUT 1­8 1 4 4 7 7 0 To preset stations manually 1 2 3 +100 Tune in a desired station. (Refer to the previous page for the tuning procedure. ) A/B/C/D/E REP A MODE D RANDOM B TEXT/TIME PROG C DISC SKIP E Press MEMORY. Within about 5 seconds, use PRESET/TUNING / to select a desired preset number. Continue pressing PRESET/TUNING / to select the group of the preset stations (A, B, C, D, and E). TAPE DIRECTION PRESET TUNER PRESET TUNER PRESET / MD CD TAPE AUX PRESET STEREO TUNED MEMORY MD REC/PAUSE TAPE REC/PAUSE MODE DUBBING START 4 Press MEMORY. · "MEMORY", "PRESET", and preset number will appear on the display. The arrow will appear for a second when it is preset. SLEEP DISPLAY VOLUME PRESET STEREO TUNED MEMORY 5 Repeat steps 1 to 4 until all desired stations are preset. Notes · A new setting can be preset in place of a previous one. · The preset stations are retained for a week after you disconnect the AC power cord or a power failure occurs. 12 USING THE BUILT-IN TIMER Before using the timer If you want to use the cassette deck, KX-E300 or the MD Recorder, MDX-E300 for timer play or recording, you must first make the connections as shown in "Connecting the system" on page 6. [. . . ] 530 ­ 1710 kHz [U. K. , Europe and Australia models] . . . . . . . . . . . . . . . . . . . . . . 531 ­ 1611 kHz [General model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530/531 ­ 1710/1611 kHz Sensitivity FM (S/N 30dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 0 µV AM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]