User manual YAMAHA CS30

[. . . ] To prevent fire or electrical shock, do not expose the unit to rain or water. If something drops into the set, contact your dealer. do not use force on switches , controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. [. . . ] If so, it can be re-stored by simply following the preset tuning procedures. You can also make use of an automatic preset tuning function for RDS stations only. Using this function, this unit performs automatic tuning and sequentially stores RDS stations with strong signals. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on page 30. Note that a new setting can be stored in place of the former one. * If TUNING is not pressed, in a while, the automatic preset tuning begins automatically toward higher frequencies. the automatic preset tuning begins from the frequency currently displayed. Received stations are stored to A1, A2 . * If more than 8 stations are received, they are also stored to the preset station numbers in other groups (B, C, D and E) in that order. If you want to store the first station received by the automatic preset tuning to a desired preset station number. For example, if you want to store the first received station to C5, select "C5" while "A1", the "MEMORY" indicator and the "AUTO TUNING" indicator flash after pressing MEMORY in step 3. The type of the program on the RDS station now being received is displayed. there are 15 program types to classify RDS stations. You can make this unit search for a station which is broadcasting a program of your desired program type. The CT data from the station being received changes every minute. If the data is accidentally cut off, "CT WAIT" may appear. When an RDS station is received, PS, PTY, RT and/or CT that correspond to the RDS data services employed by the station light up on the display. By pressing RDS MODE, you can change the display mode among the RDS modes employed by the received station in the order shown below. Illumination of the RDS modes indicator shows that the corresponding RDS mode is now selected. * When an RDS station is received, do not press RDS MODE until one or some names of RDS modes light up on the display. If the button is pressed before one or some names light up on the display, the mode cannot be changed. This is because the unit has not received all of the RDS data on the station yet. [. . . ] Make the GND connection between the turntable and this unit. The turntable should be connected to the unit through the MC head amplifier. There is no S video terminal connection between this unit and the TV, though S video signals are input to this unit. The protection circuit has been activated because of short circuit etc. [. . . ]