User manual YAMAHA CSY2AE

[. . . ] 40 Connecting the devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Setting the input channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Applying EQ/dynamics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Setting the output channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Using GEQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Applying effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Changing the patch settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Grouping and linking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Setting a custom fader bank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Using talkback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Routing the oscillator to an output channel. . . . . . 48 Using scene memories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Recording and playing audio using a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Saving and loading the unit settings . . . . . . . . . . . . . . . . 50 An overview of the CL series . . . . . . . . . . . 8 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 About the models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Controls and functions . . . . . . . . . . . . . . . . . . 10 Top panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the Bank Select key for the channels or DCA group that you want to retain for the Centralogic section, and hold it down for two seconds or longer. The LED of the Bank Select key will start blinking. The blinking indicates that the corresponding channels or DCA groups are now retained for the Centralogic section. 28 Owner's Manual Using the top panel (Channel Strip section) 2. Press a Bank Select key to select the eight channels (other than the DCA groups) that you want to control in the OVERVIEW screen. The lit status indicates that the corresponding channels can be controlled in the OVERVIEW screen and by the multifunction knobs. Using the top panel (Channel Strip section) The Channel Strip section of the top panel enables you to control the level, gain, pan, CUE, and other parameters for the selected channels. The basic procedure is as follows: 1. Use the Bank Select keys located on the right These controls affect INPUT channels 1­8 in the OVERVIEW screen. of the Channel Strip section to select the channels or DCA groups that you want to control. Each Bank Select key holds a "Bank, " which bundles a group of multiple channels. "CUSTOM" Bank Select keys enable you to assign and recall a bank with your own assortment of the channels or DCA groups. These banks are called "custom fader banks. " Since the custom fader banks enable you to assign a combination of different types of channels, you can control different types of channels as a group. These controls affect DCA groups 1­8. 2. Use the controls of the Channel Strip section. Use the channel knob to adjust a parameter selected by the [GAIN/PAN/ASSIGN] key. Repeat step 5 to select all channels that you want to assign to the custom fader bank. 7. When you have finished, press the X symbol in the upper right corner of the screen. Adjusting the send level to a MIX bus or MATRIX bus (SENDS ON FADER mode) Each fader on the top panel enables you to adjust the level of the corresponding channel, as well as the send level of the signal routed from each channel to the currently-selected MIX/MATRIX bus (SENDS ON FADER mode). Follow the procedure below to use the faders on the top panel to adjust a signal that is sent from all input channels to a specific MIX bus. 4. Use the faders in the INPUT section to adjust the send level from the input channels to the selected MIX/MATRIX bus. NOTE You can assign the SENDS ON FADER function to a USER DEFINED key. This lets you quickly switch to SENDS ON FADER mode for a specific MIX/MATRIX bus, and quickly switch back again. 5. Repeat steps 3­4 to adjust the send level for other MIX/MATRIX buses in the same way. 1. In the function access area in the display, press the SENDS ON FADER button. 1 The CL will switch to SENDS ON FADER mode. The most recently selected group of MIX/MATRIX buses will be assigned to the Centralogic section. The faders in the Channel Strip section will move to indicate the send level of the 2 signals that are routed from each channel to the currently-selected MIX/MATRIX bus. In SENDS ON FADER mode, the function access area in the display will show the button that enables you to switch between 6. [. . . ] Input [+4dBu] OUT OUT CASCADE OUT OUT +30 +24 +20 +10 +4 0 -10 -20 -30 Nominal Output [+4dBu] PHONES Max Output (150mW@8 Nominal Input [-16dBu] ) Nominal Output (75mW@8 ) Max. Input [-42dBu] -40 OMNI OUT1-8 [Default setting] -50 -60 -70 Nominal Input [-60dBu] Nominal Input [-62dBu] OMNI IN 1-8 (GAIN MIN. ) OMNI IN 1-8 (GAIN MAX. ) TALKBACK (GAIN MIN. ) TALKBACK (GAIN MAX. ) -80 -90 -100 -110 -120 -130 -140 -150 -160 Max. DSP Noise Floor -170 -180 -190 [0dBu = 0. 775Vrms] [0dBFS = Full Scale] For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. [. . . ]