User manual YAMAHA CVP-409-407-405-403-401 DATA LIST

[. . . ] To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel. For information on assembling the keyboard stand, refer to the instructions at the end of this manual. EN SPECIAL MESSAGE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded/stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page. Please observe all cautions indicated on this page and those indicated in the safety instruction section. Battery Notice: This product MAY contain a small non- rechargable battery which (if applicable) is soldered in place. [. . . ] [FUNCTION] [B] SONG SETTING Set the parameters related to the Repeat Playback by using the [H]/[I] buttons. The available parameters are shown below. REPEAT MODE OFF Plays through the selected Song, then stops. SINGLE Plays through the selected Song repeatedly. ALL Continues playback through all the Songs in the folder containing the current Song repeatedly. RANDOM Randomly and repeatedly plays back all Songs in the folder containing the current Song. 2 PHRASE MARK REPEAT For Songs containing Phrase Marks, you can set Repeat Playback to "ON" or "OFF. " When this is on, the part corresponding to the specified Phrase Mark number is repeatedly played back. The steps for specifying the Phrase Mark number are the same as in the steps 1­2 of the section "Moving back and forth (rewind and fast forward)" (see above). 134 CVP-405/403/401 Owner's Manual Operations for Song Playback Queuing the Next Playback Song While a Song is playing back, you can queue up the next Song for playback. This is convenient for chaining it to the next Song smoothly during stage performance. Select the Song you want play next in the Song Selection display, while a Song is playing back. The "NEXT" indication appears at the upper right of the corresponding Song name. To cancel this setting, press the [8] (Cancel) button. Parameter Lock You can "lock" specific parameters (e. g. , effect, split point, etc. ) to make them selectable only via the panel controls (page 128). Using the Auto Accompaniment Features with the Song Playback When playing back a Song and a Style at the same time, channels 9­16 in the Song data are replaced with style channels--allowing you to play the accompaniment parts of the Song yourself. Try playing chords along with the Song playback as shown in the instructions below. Below are two operation examples. Adjusting the Volume Balance of Each Channel 1 2 3 4 Select a Song (page 35). Press the [MIXING CONSOLE] button to call up the MIXING CONSOLE display. Select the [VOL/VOICE] tab by pressing the TAB [][®] buttons. Press the [MIXING CONSOLE] button repeatedly to call up the display of "SONG CH 1­8" or "SONG CH 9­16. " Press the [J] button to select the "VOLUME. " Adjust the volume balance of each channel by using the [1]­ [8] buttons. Using, Creating and Editing Songs Press the [C]/[H] (VOICE) buttons in step 5 to select the Voice which you want to change. Then, press one of the [1 ] to [8 ] buttons to call up the Voice selection display for the channel. 5 6 7 You can save the volume settings to the Song in the Setup operation of the SETUP (page 158). Make sure to checkmark the "VOLUME" item in step 2 of the Setup procedure. 136 CVP-405/403/401 Owner's Manual Using the Practice Function (Guide) Changing Voices 1­4 5 6 7 8 The operation steps are the same as in the "Adjusting the Volume Balance of Each Channel" (see page 136). Press the [H] button to select the "VOICE". Press one of the [1]­[8] buttons to call up the Voice selection display for the channel. Press one of the [A]­[J] buttons to select a Voice. You can save the changed Voice selection to the Song in the Setup operation (page 158). Make sure to checkmark the "VOICE" item in step 2 of the Setup procedure. Using the Practice Function (Guide) The keyboard guide lamps indicate the notes (location and timing) for you to play. Also, when you sing along with a Song playback using a connected microphone (CVP-405/403), the instrument automatically adjusts the timing of the Song playback to match your vocal performance. To use the practice function, press the [GUIDE] button. Saving the Guide settings in the SONG SETTING display You can save the Guide settings as a part of the Song data (page 158). For Songs to which Guide settings have been saved, the Guide function will be automatically turned on and the related settings will be recalled when the Song is selected. Selecting the Guide Function Type 1 2 Using, Creating and Editing Songs Call up the setting display: [FUNCTION] [B] SONG SETTING Use the [A]/[B] buttons to select the desired Guide function type. [. . . ] Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 HONG KONG Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. [. . . ]