User manual YAMAHA CVP-94-CVP-92

[. . . ] IMPORTANT Check Your Power Supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. [. . . ] The Song Play mode is automatically called up when a song disk is inserted in the disk drive. DISK IN USE · The Song Play mode is not automatically engaged from the disk-related FUNCTION displays, or the CUSTOM STYLE display -- even when inserting the disk. Sliding shutter Label 75 The DISK IN USE lamp lights while the CVP-94/92 reads and identifies the disk. Once the disk has been identified, the SONG PLAY [MAIN] display (display page 1) appears in the display and the [SONG] lamp lights. If a song disk is already inserted but the Song Play mode is not engaged, press the [SONG] button. The [SONG] lamp lights. Press the PAGE [<] [>] buttons to select the first page, if the SONG PLAY [MAIN] display is not shown. XSelect a song number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Select the desired song number for playback by using the SONG M or L buttons, data dial or [­/+] buttons. The selected song number, name, current tempo and the file icon which indicates the type of the file are displayed. · Song numbers 1 - 60 are displayed, including song numbers that contain no song data. However, no song names are displayed for song numbers that contain no data. Select "ALL" if you want all songs on the disk to be played in order. Select "RANDOM" if you want all songs on the disk to be played at random. For either selection "ALL" or "RANDOM" the songs will be repeated until playback is stopped. Current voice for the keyboard Tempo Selected song number/name File icon G File Icons There are four icons (shown below) that indicate the type of the file. / / / / XG/SMF format file DOC/ESEQ format file Yamaha Disklavier PianoSoft or XG/ESEQ file Song data recorded with the CVP-94/92 76 · Refer to the section "MIDI and Data Compatibility" (page 8 in the Reference Manual) for information on file formats. · Icons are not shown for song data file recorded with other CVP models, excepting the CVP-94/92 and CVP98/96. Song Playback Song Playback Use the PAGE [<] [>] buttons to call up the SONG PLAY [LIST] display (display page 3), to view the entire list of the song names in the disk. The desired song can be selected easily by using the data dial or [­/ +] buttons. Up to eight song titles are shown in the display at a time. If more songs are on the disk, the next eight titles will appear when you scroll past the last title shown in the display. When nothing appears in the song name location. . . · This indicates that there is no song data for this song number. Repeat Playback from Specific Songs · If you first select ALL in the SONG PLAY [MAIN] display, and then select a song in the SONG PLAY [LIST] display (display page 3), all songs will be repeatedly played back starting from the selected song. Repeat Playback of a Single Song · If you select a song in the SONG PLAY [MAIN] display or in the SONG PLAY [LIST] display (display page 3), and then select the 1 SONG in the SONG PLAY REPEAT display (display page 4), only the selected song will be played back repeatedly until stopped. CStart and stop playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Start playback of the selected song by pressing the panel [PLAY/ STOP] button. Playback of the selected song starts. Unless ALL or RANDOM is selected, the selected song will play through to the end and playback will stop automatically. The current measure number and tempo will be shown in the display during playback. Voice Selection During Playback · The voice you play from the keyboard can be changed during song playback by selecting a voice in the normal way (page 23). The voices of the 1/RIGHT & 2/LEFT part being played back can be changed in the SONG PLAY [PART] display (page 80). You can also start playback of the selected song by pressing the [START/STOP] button. SONG CONTROL SONG PLAY/ STOP REC · Please note that the song may not start immediately after pressing [PLAY/ STOP]. PAUSE REW FF Press the panel [PLAY/STOP] button to stop playback. Song playback stops. Turning off the Keyboard Guide Lamp · The keyboard guide lamps corresponding to the keys being played by the 1/RIGHT and 2/LEFT part will light in real time. These guide lamps can be turned off in the SONG PLAY [GUIDE MODE] display (display page 5). (See page 91. ) You can also stop playback by pressing the [START/STOP] button. You can exit from the song play mode by pressing the [SONG] button. The lamp turns off and the previous display appears. Using the Pedal to Start/Stop Playback · By setting the Left Pedal Function to START/STOP in the FUNCTION [PEDAL] display (display page 3), the left pedal can function the same as the [START/STOP] button. (See page 119. ) 77 G Adjusting the Tempo The playback tempo of the song can be changed freely as desired. [. . . ] Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-703-0900 BRAZIL Yamaha Musical do Brasil LTDA. Rebouças 2636, São Paulo, Brasil Tel: 011-853-1377 PHILIPPINES Yupangco Music Corporation 339 Gil J. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 ARGENTINA Yamaha Music Argentina S. A. [. . . ]