User manual YAMAHA DD50E

[. . . ] Owner's Manual Bedienungsanleitung Mode d'emploi Manual de instrucciones 2 ESPAÑOL FRANÇAIS DEUTSCH DIGITAL ENGLISH SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adaptor). DO NOT connect this product to any power supply or adaptor other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc. , is used, please observe all safety markings and instructions that accompany the accessory product. Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. [. . . ] Muting DRUM 1 and DRUM 2 tracks allows you to practice your playing technique in Karaoke style (Minus One). TAP START The TAP START function allows you to set the song's overall tempo as well as start the accompaniment. The accompaniment will playback at the tempo with which the pads are struck or the pedals are pressed. 1 RE C. Press the [BREAK/TAP START] button Press the [BREAK/TAP START] button when the song stops, its indicator will flash and the DD-50 is in Tap Start standby mode. To cancel the Tap Start mode, simply press the [BREAK/TAP START] button once again (the indicator will turn off). ST ART/ STOP A-B REPEAT BREAK/ TAPSTART 2 Tap Start In the case of a song in 4/4, strike any pad or press any pedal four times, the accompaniment will start at the desired tempo. · The number of times needed to strike the pad will change according to the following time signatures; 5/4, 5 times; 4/4, 4 times; 3/4, 3 times; 6/8, 2 times. RE C. ST ART/ STOP A-B REPEAT BREAK/ TAPSTART 3 Stop the Song Playback To stop playback, press the [START/STOP] button. 12 Play along with a SONG BREAK With the BREAK function, you can liven up songs by adding your own solos or fills, whenever you want. Striking a pad while in the BREAK mode, the song's accompaniment will be muted until the end of the measure you have finished your fill or solo in. RE 1 C. During song playback, press the BREAK/TAP START button During song playback, press the [BREAK/TAP START] button, its indicator will flash and the DD-50 is in BREAK standby mode. To cancel the Break mode, simply press the [BREAK/TAP START] button once again (its indicator will turn off). ST ART/ STOP A-B REPEAT BREAK/ TAPSTART 2 Break Strike any pad and the accompaniment will mute until the end of the measure you played in. You can play a drum fill or drum solo during this break. RE C. ST ART/ STOP A-B REPEAT BREAK/ TAPSTART 3 Exit the BREAK mode The DD-50 returns to the BREAK standby mode when the BREAK measure is completed. To exit the BREAK mode, press the [BREAK/TAP START] button. The BREAK mode is also exited when the song is stopped. 13 Play along with a SONG A-B REPEAT If you want to practice a particular section of a song, you can specify that section's "A" (start repeat) and "B" (end repeat) points. The accompaniment will continuously repeat between points "A" and "B" allowing you to practice between those points for as long as you like. RE C. ST ART/ STOP A-B REPEAT BREAK/ TAPSTART 1 BEAT To set the "A" (start repeat) point When the song playback has reached the start of the section you want to practice, press the [A-B REPEAT] button and the "A" repeat point is set. An "A" will appear in the display. A 2 To set the "B" (end repeat) point When the song playback has reached the end point of the section you want to practice, press the [A-B REPEAT] button once again and the A to B repeat points are set, "b" appears in the display. "Ab" will appear in the display and after a one measure count-in the repeat playback will start. The current measure number will appear in the display during the repeat playback. · The A-B REPEAT start and end points can only be set in measure steps. · Songs consist of two types; loop type and sequence type (see the "Song List" on page 26). When setting the A-B points for sequence songs, set both points before the end of the song. The set "A" point will be canceled if the "B" point is not set before the end of the song. RE C. ST ART/ STOP A-B REPEAT BREAK/ TAPSTART BEAT Ab 3 RE C. Stop the A-B REPEAT mode Press the [START/STOP] button and the song accompaniment will stop. "Ab" will appear in the display indicating the A-B REPEAT mode is still engaged. Press the [START/STOP] button once again and the accompaniment will again repeat between the set points. · In the case of a loop type song, it is possible, for example, to set the "A" point at measure 10 and set the "B" point at measure 3 (after the song has looped back to the beginning). B A 3 10 ST ART/ STOP A-B REPEAT BREAK/ TAPSTART BEAT Ab · Selecting another song will cancel any previously set A-B REPEAT points. RE C. ST ART/ STOP A-B REPEAT BREAK/ TAPST ART q Cancel the Repeat Points To cancel the A-B REPEAT, press the [A-B REPEAT] button during playback or while playback is stopped, the A-B REPEAT mode will be canceled (the A-B REPEAT points will also be canceled) and normal playback of the accompaniment will continue. 14 Try Recording The DD-50's Custom Song feature (song number "CU") allows you to record and playback one original song (600 notes approximately). q Data that can be recorded in the Custom Song Mode. · Drum pad and pedal data. · Song data (the number cannot be changed while in the RECORD Mode). · Tempo setting (The tempo cannot be changed while in the RECORD mode). · Break ON/OFF setting. * MIDI data cannot be recorded to the memory. RECORD 1 Prepare to Record Select the desired song, drum kit, tempo, track on/off setting, and reverb settings. 2 RE C. Start Recording Press both the [START/STOP] and [BREAK/TAP START] buttons simultaneously, after a count-in (the indicator will flash) recording will start. START/ STOP A-B REPEAT BREAK/ TAPST ART BEAT oo · Data will not be recorded during the 2 measure count-in. · Press the BREAK/TAP START button during the 2 measure count-in to enter Tap Start Record Standby mode (see page 12). [. . . ] Tel: 686-00-33 KOREA Cosmos Corporation #131-31, Neung-Dong, Sungdong-Ku, Seoul Korea Tel: 02-466-0021~5 GREECE Philippe Nakas S. A. Navarinou Street 13, P. Code 10680, Athens, Greece Tel: 01-364-7111 SWEDEN Yamaha Scandinavia AB J. Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. 16-28, Jalan SS 2/72, Petaling Jaya, Selangor, Malaysia Tel: 3-717-8977 BRASIL Yamaha Musical Do Brasil LTDA. [. . . ]