User manual YAMAHA DM1000

[. . . ] Owner's Manual Keep This Manual For Future Reference. E FCC INFORMATION (U. S. A. ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. [. . . ] To punch in events by performing this operation, turn on the Auto EQ Edit preference. To punch in events by performing this operation, assign EQ parameters to the Encoders. 6 Stop the Automix. A confirmation window regarding updating the Automix data appears. 16 Automix DM1000--Owner's Manual 190 Chapter 16--Automix [SEL] Button Functions While the [AUTO] Button Indicator Is On While the [AUTO] button indicator is lit, you can use the channel [SEL] buttons to turn the Automix function on and off, arm or disarm channels, or punch channels in and out. The [SEL] button indicators operate as follows: · Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . · Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automix stopped or playing · Orange. . . . . . . . . . . . . . . . . . . . . . . . . . . · Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automix recording in progress · Flashing red. . . . . . . . . . . . . . . . . . Edit Out mode set to TAKEOVER, and fader events continue recording after punch out · Flashing green. . . . . . . . . . . . . . Edit Out mode set to TAKEOVER, and faders are disabled after punch out Playing Back an Automix As long as the Automix function is enabled, the Automix function will chase the incoming timecode and play and stop the current Automix accordingly. You can stop playback manually by moving the cursor to the STOP or ABORT button on the Automix | Main/Memory page, then pressing [ENTER]. Playback will stop automatically if the DM1000 receives no timecode for a while, if the DM1000 receives MIDI Stop commands (only when the MIDI CLOCK source is selected), or if the end of the Automix data is reached. While the [AUTO] button indicator is lit, the [SEL] button indicators light up green on the channel strips available for Automix playback. When Automix playback for an individual channel is disabled, its [SEL] button indicator turns off. During playback, faders move in accordance with recorded fader events (as long as the corresponding layer and Fader mode is selected). You can disable fader movement by turning off the MOTOR button on the Fader 1 or 2 page (see page 196). You can view fader events on the Fader 1 or 2 page (see page 196), and other events on the corresponding pages. Recorded events of the currently-selected channel are reflected in the SELECTED CHANNEL section controls and displays. Note: If the current effects type is different from that used when the effects parameter edits were recorded, the parameter edits will not be played back. When you rerecord effects parameter edits from the beginning, it is recommended that you delete the existing effects events offline. DM1000--Owner's Manual Automix Main Page 191 Automix Main Page This section explains the Automix Main page. This page enables you to set the basic Automix parameters and record and play back Automixes. To locate the Automix | Main page, press the DISPLAY ACCESS [AUTOMIX] button repeatedly until the page appears. 1 4 6 7 J 2 3 5 8 9 K L M N A FREE O P Q R The amount of free Automix memory remaining is displayed here in kilobytes, as a percentage, and by a bar graph. B SIZE The size of the current Automix and the size of any Automix data in the undo buffer are displayed here in kilobytes. C TIME REFERENCE The timecode source and frame rate specified on the Time Ref page (see page 182) are also displayed here. D INT START TIME This parameter sets the start time of the DM1000 internal timecode generator in hours, minutes, seconds, frames, and subframes. [. . . ] 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Belgium Rue de Geneve (Genevastraat) 10, 1140 - Brussels, Belgium Tel: 02-726 6032 ASIA INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. 4, Jakarta 12930, Indonesia Tel: 21-520-2577 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. [. . . ]