User manual YAMAHA DM2000E5

[. . . ] Yamaha DM2000 Update V1. 1 This document explains the new and revised functions for DM2000 Update 1. 1. 5. 1 ON 5. 1 OFF Scene Memory & Input/Output Patch Linking Input Patch and Output Patch library memories can be linked to Scene memories so that when a Scene is recalled, the input and output patches are recalled as well. [. . . ] In addition, the Monitor Matrix configurations have changed as follows. (The 5. 1 to 5. 1 matrix is unchanged. ) 3-1 to 3-1 5. 1 to 5. 1 Bass Management for 3-1 & ST Monitor Matrixes Bass Management can now be used with the 3-1 and Stereo Out monitor matrixes. Previously, Bass Management could be used only with the 5. 1 monitor matrix. The Bass Management function can be found on the Surround Monitor Setup page, which can be located by using the MONITOR [DISPLAY] button when either the 3-1 or 5. 1 Surround mode is selected. The following screen shots show the Bass Management configurations for the 5. 1, 3-1, and Stereo monitor matrixes, with Bass Management turned on and off. 3-1 to ST 5. 1 to 3-1 5. 1 to ST E 1 DAW Control Regardless of Layer Selection Previously, the transport controls, locator, track arming functions, and shuttle and scrub could be used to control an external DAW only when a Remote Layer was selected. With the new DAW CONTROL option, a DAW can be controlled regardless of which Layer is currently selected. The new MACHINE CONTROL and DAW CONTROL options have been added to the following five pages: Machine Configuration and Locate Memory, which are selected by using the LOCATOR [DISPLAY] button, and Track Arming Group, MTR Track Arming Configuration, and Master Track Arming Configuration, which are selected by using the TRACK ARMING [DISPLAY] button. When the MACHINE CONTROL option is on, external MMC/P2 machines can be controlled, except when a DAW Remote layer is selected, in which case the DAW is controlled. When the DAW CONTROL option is on, the DAW can be controlled regardless of which Layer is currently selected. 2 Dimmer & Talkback Control via the CONTROL Port The Control Room and Surround Monitor Dimmers, and the Talkback function can now be controlled remotely via the CONTROL port. User Defined Keys The following items have been added to the list of functions that can be assigned to the USER DEFINED KEYS. # 161 162 163 Function Surr Lib. [. . . ] In addition, the following initial assignments of USER DEFINED KEYS Bank A have changed. # 1 2 3 Bank A SOLO ON No Assign No Assign --> --> --> # 1 2 3 Bank A Surr Lib 0 RCL Surr Lib ­1 RCL Surr Lib +1 RCL When the Solo Bus to Studio Out preference is on, and all the STUDIO signal source buttons in the MONITOR section are off (i. e. , [CONTROL ROOM], [STEREO], [AUX 11], and [AUX 12]), the Solo signal is output by the STUDIO MONITOR OUT when channels are soloed. 3 M. D. G. , PA·DMI Division, Yamaha Corporation © 2002 Yamaha Corporation [. . . ]