User manual YAMAHA DMR8

[. . . ] All other trademarks are the property of their respective holders and are hereby acknowledged. Copyright No part of the Studio Manager for DMR8 software or its documentation may be reproduced or distributed in any form or by any means without the prior written authorization of Yamaha Corporation. All rights reserved. Yamaha Web Site Information about Studio Manager for DMR8, related products, and other Yamaha professional audio equipment is available on the Yamaha Professional Audio Web site at: <http://www. yamaha. co. jp/product/proaudio/homeenglish/navi/index. htm>. Specifications and external appearance subject to change without notice. Studio Manager for DMR8 V1. 1--Owner's Manual ii Contents 1 Getting Started . 10 12 14 16 18 19 4 5 Library Window . [. . . ] The rotary controls are used to set the gain, center frequency, and Q of each band, and the pre-EQ attenuation level. EQ can also be set by dragging the EQ curve on the EQUALIZER graph. The LIBRARY button opens the EQ Library window. D DELAY & PHASE section This section contains the delay and phase controls for the currently selected Input Channel. The rotary controls are used to set the delay time, feedback gain, and feedback mix. The ON button turns the Delay on and off. The PHASE button reverses the channel's signal phase. E Routing, pan & level section This section contains the routing, pan, and level controls and the AUTO, SOLO, and ON buttons for the currently selected Input Channel. ROUTING buttons 1­8 are used to route the channel to the Bus Outs. The STEREO button routes the channel to the Stereo Out. The DIRECT button routes the channel to its Direct Out, and the parameter below it selects a Direct Out destination. The F. PAN button turns on and off the Bus Out Follow Pan function. The PAN control is used to pan the channel. See "EQUALIZER section" on page 11 for more information. C DELAY section This section contains the delay controls for the currently selected Bus Out. The rotary control is used to set the delay time, and the ON button turns the Delay function on and off. Studio Manager for DMR8 V1. 1--Owner's Manual 13 Chapter 3--Selected Channel Window D TO STEREO & level section This section contains the TO STEREO and level controls and the AUTO, SOLO, and ON buttons for the currently selected Bus Out. The TO STEREO button routes the Bus Out to the Stereo Out, and the rotary controls are used to set the Bus to Stereo level and pan. The AUTO button displays the Automix status. The SOLO button is used to solo the Bus Out, the ON button, to turn the Bus Out on and off, and the channel fader, to set the Bus Out level. E COMPRESSOR section This section contains the Compressor controls and display graph for the currently selected Bus Out. Its layout is identical to the COMPRESSOR section for Input Channels. See "COMPRESSOR section" on page 11 for more information. F INSERT section This section contains the Insert parameters for the currently selected Bus Out. The INSERT button turns the Insert on and off. The OUT and IN parameters are used to select the insert out destination and insert in source respectively. The POSITION parameter is used to specify the position of the Insert in the signal path. G Pair, FADER GROUP & MUTE GROUP section This section contains the Pair, Fader and Mute group functions for the currently selected Bus Out. Click the heart icon to pair and unpair the channel with its partner channel. [. . . ] To unpatch, click a blue dot. Studio Manager for DMR8 V1. 1--Owner's Manual 23 Chapter 5--Patch Editor Window Output Patch Page 1 2 3 4 5 6 A Channel IDs These are the Channel IDs. B Long channel names These are the Channel long names. To edit a name, click it and type. C AUTO SETUP button Clicking this button sets the patches on this page to their initial values. D ALL CLEAR button This button clears all patches on this page. E LIBRARY button This button opens the Output Patch Library window. F Patchbay The patchbay is used to patch output ports to Output Channels. Active patches are indicated by a red dot. To unpatch, click a red dot. Studio Manager for DMR8 V1. 1--Owner's Manual Insert Patch Page 24 Insert Patch Page 1 2 3 4 5 A Channel IDs These are the Channel IDs. B Long channel names These are the Channel long names. [. . . ]