User manual YAMAHA DPX-830

[. . . ] DPX-830 Digital Cinema Projector Projecteur Cineme Numerique OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING IMPORTANT SAFETY INSTRUCTIONS 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 8 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 9 10 11 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. [. . . ] The projector automatically makes optimum positional settings for the input signal. · If the image is not projected in the correct position even after you press the AUTO or AUTO SYNC button several times, change the settings in the SIGNAL menu to put the image in the correct position (see page 31). · When you carry out this procedure with a dark image, the image may be displaced. Connecting to a notebook computer When the projector is connected to a notebook computer, images may not be projected in some cases. If this happens, set the computer so that it can output signals externally. The setting procedure varies depending on the type of the computer. Refer to the instruction manual of your computer. 20 7 Menu Menu overview Menus are not displayed when no signal is received by the projector. IMAGE GAMMA DEFAULT DYNAMIC STANDARD CINEMA CUSTOM1 , CUSTOM2 ± 30 ± 30 NATIVE HIGH MID LOW CUSTOM ± 10 ± 10 ±5 ON, OFF CONTRAST BRIGHTNESS COLOR TEMP. GAMMA - CUSTOM1 GAMMA - CUSTOM2 REFERENCE H M L DYNAMIC, STANDARD, CINEMA ±5 ±5 ±5 COLOR TEMP. - CUSTOM SATURATION *1*3 HUE *1*3 SHARPNESS *1*3 BrilliantColor TM SET UP SCREEN ASPECT VERTICAL LOCATION LAMP MODE AUTO POWER ON AUTO POWER OFF SPLASH SCREEN HIDE SCREEN COLOR LOCATION TRIGGER OUT TEST PATTERN *2 ASPECT MENU POSITION PROGRESSIVE MODE *3 COLOR SYSTEM *3 SET UP LEVEL *1*3 SCART INPUT *3 LANGUAGE RESET ALL HORIZ. POSITION *3 VERT. POSITION *3 *3 PHASE TRACKING *1*3 *3 OVER SCAN D-SUB INPUT *3 *1 BLACK MASK CONTRAST R CONTRAST G CONTRAST B BRIGHTNESS R BRIGHTNESS G BRIGHTNESS B ± 30 ± 30 ± 30 ± 30 ± 30 ± 30 16:9, 4:3 ± 26 STANDARD, CINEMA ON, OFF OFF, 5, 10, 15, 30, 60 min ON, OFF BLUE, BLACK FRONT/TABLE, REAR/TABLE, FRONT/CEILING, REAR/CEILING ON, OFF CROSS HATCH , WHITE , BLACK DEFAULT, NORMAL, SQUEEZE, SUBTITLE ZOOM, ZOOM, SMART ZOOM, THROUGH UPPER LEFT, UPPER RIGHT, LOWER LEFT, LOWER RIGHT AUTO, VIDEO AUTO, NTSC, PAL, SECAM, 4. 43NTSC, PAL-M, PAL-N, PAL-60 DEFAULT, 0%, 3. 75%, 7. 5% ON, OFF , ENGLISH, ESPANÕL, DEUTSCH, FRANÇAIS, ITALIANO, EXECUTE *2 0 - 999 *2 0 - 999 0 - 31 *2 0 - 9999 *2 100 - 90% AUTO, RGB, COMPONENT EXECUTE INITIAL SIGNAL BLACK MASK SYNC NOISE MASK *1*3 A/D SETTING ON OFF EXECUTE SYNC NOISE MASK A/D SETTING *1 TOP *1 BOTTOM *1 LEFT *1 RIGHT BEGIN END CLAMP POSITION *3 CLAMT WIDTH *3 VERT. SYNC *1 *3 LPF 0 - 38 0 - 38 0 - 95 0 - 95 0 - 99 0 - 99 *2 0 - 63 *2 1 - 63 AUTO, OFF ON, OFF After selecting the items marked with , press the ENTER button. *1: Not available with certain signals. *2: The defaul value and the setting range differ depending on the input signal. *3: See next page for availability and unavailability. 21 SATURATION HUE SHARPNESS PROGRESSIVE MODE COLOR SYSTEM SET UP LEVEL SCART INPUT HORIZ. POSITION PHASE TRACKING OVER SCAN D-SUB INPUT SYNC NOISE MASK CLAMP POSITION CLAMP WIDTH LPF Unavailable when the input source is HDMI or D-SUB source is an RGB signal. Available only when the VIDEO or S-VIDEO source is NTSC or 4. 43NTSC signal. Unavailable when the D-SUB or HDMI source is a computer signal. Available only when the input signal is TV50, TV60, 480i or 576i. Available only when the input source is VIDEO or S-VIDEO. Unavailable when the input source is HDMI, and also when the D-SUB source is a computer signal. Available only when the input source is D-SUB. Unavailable when the input source is HDMI. Unavailable when the input source is HDMI. Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal. Available only when the D-SUB source is a computer signal. Unavailable when the VIDEO or S-VIDEO source is NTSC, 4. 43NTSC, PAL-M, PAL-60 signal. [. . . ] · If the above solution is not effective, replace the lamp. Change with a new lamp if this problem recurs. Steady green Blinking green/red Lamp operation time warning. (Total lamp operation time reached 2250 hours*1 while the power was on. ) Lamp operation time warning. (Total lamp operation time reached 2250 hours*1 while the power was off. ) Lamp operation time warning. [. . . ]