User manual YAMAHA DPX1

[. . . ] UCA DPX­1 Digital Cinema Projector Projecteur Cinema Numerique OWNER'S MANUAL MODE D'EMPLOI Caution: Read this before operating this unit. · To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. · When not planning to use this unit for a long period of time (i. e. vacation), disconnect the AC power plug from the wall outlet. [. . . ] "THROUGH -SQUEEZE-" displays the image with its width scaled up. Available items depend on the "SCREEN ASPECT" setting and the type of input signals. The "AUTO" setting may not switch to the most appropriate mode for some sources. If it doesn't, make a setting manually. "ZOOM -SUBTITLE-" has further items to be adjusted SUBTITLE AREA: adjusts the subtitle area. V SCROLL: adjusts the subtitle position by vertically scrolling the projected image. SUBTITLE MASK Darkens the brightness of the characters in the subtitles when playing the film in letterbox with subtitles (except for HDTV). MASK POSITION Changes the effective height for the "SUBTITLE MASK" adjustment (except for HDTV). 3D Y/C SEPARATION Suppresses the rainbow-like color crossing the image of fine vertical stripes or annoying dot interference on the image edge when the video signal is input. This adjustment is available only for the composite signal in NTSC mode. NOISE REDUCTION Effectively reduces the noise included in the luminance signal and color signal by digital processing when playing the source with a relatively large amount of noise in order to create a more vivid image (interlaced signal only, except for HDTV). VIDEO TYPE Selects VCR when playing video tapes in order to ensure synchronization, and selects DVD when playing other sources. SETUP LEVEL Adjusts the black level difference of the image signal. Select 0% for a signal with no difference from the pedestal level, and 7. 5% for a signal with higher black level. Image signal % 100 Choice/adjustment range AUTO/NORMAL/ SQUEEZE/ZOOM/ZOOM -SUBTITLE- S (SUBTITLE AREA, V SCROLL)/THROUGH/ THROUGH -SQUEEZE- Video/Component 0 to 99 0 to 99 OFF/ON Video/Component Video ­10 to 10 ON/OFF Video/Component OFF/1/2/3 Video DVD/VCR Video/Component 0%/7. 5% Pedestal level 0 Black level RGB RGB RGB RGB RGB DOT PHASE Fine-adjusts the phase of the RGB signal input from the computer for clearest display of the characters and lines of the image (except for DVI). SIZE H Adjusts the horizontal size of the projected image (except for DVI). SHIFT H Adjusts the horizontal position of the projected image (except for DVI). SHIFT V Adjusts the vertical position of the projected image (except for DVI). SIGNAL STATUS Displays the resolution and sync. frequency of the input signal. 0 to 31 ­2047 to 2048 0 to 100 0 to 100 -- E-16 Menu structure I 3 <INITIAL> Menu item COLOR SYSTEM S Selects the color system when the video signal is input among NTSC, NTSC4. 43, PAL, PAL-M, PAL-N, PAL60, SECAM. AUTO should normally be selected so that the appropriate color system can be automatically selected depending on the input signal. However, PAL-M should be selected when the input signal is PAL-M. [. . . ] 1 in front and 1 at rear General Usable temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5°C to 35°C Usable humidity range 30% to 85% (There should be no condensation. ) Power supply . . . . . . . . . . . . . . . . . . . AC 100 to 120 V/220 to 240 V, 50/60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 W Standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]