User manual YAMAHA DS55E

[. . . ] · For information about the target model and available functions of this manual, refer to the end of this manual. 1 What You Can Do by Connecting to a Computer Many digital musical instruments support the MIDI (Musical Instrument Digital Interface). With this technology, the instrument can communicate with a connected computer, transmitting/receiving the MIDI data, including keyboard performance information and Song playback data. NOTE · This manual covers only MIDI communication between the instrument and computer via a USB cable and MIDI cables. Note that audio-related information is not covered. · For details about MIDI, refer to "MIDI Basics" on Yamaha Manual Library (web site). Transferring MIDI Files including Songs . . . [. . . ] Depending on the application, the recorded data can be edited in various ways, and even converted to notation. Instrument Record 2 Connecting to a Computer: Which Terminal Should I Use? Most MIDI instruments are equipped with MIDI terminals or a USB TO HOST terminal for connecting to a computer. Confirm which terminal your instrument is equipped with. When equipped with a USB TO HOST terminal: . . . page 4 In this case, the instrument can be connected to the computer via a USB cable (AB type USB cable of less than 3 meters). When equipped with MIDI terminals: . . . page 5 In this case, the instrument can be connected to the computer via MIDI cables and a USB-MIDI interface such as the Yamaha UX16. If the instrument is equipped with both terminals, we recommend you use the USB TO HOST terminal, since there is need for only one cable and multiple ports can be supported. 3 Connecting a Computer to the Instrument Connecting to the USB TO HOST terminal Precautions when using the USB TO HOST terminal When connecting the computer to the USB TO HOST terminal, make sure to observe the following points. Failing to do so risks freezing the computer and corrupting or losing the data. If the computer or the instrument freezes, restart the application software or the computer OS, or turn the power to the instrument off then on again. NOTICE · Use an AB type USB cable of less than 3 meters. · Before connecting the computer to the USB TO HOST terminal, exit from any power-saving mode of the computer (such as suspend, sleep, standby). · Before turning on the power to the instrument, connect the computer to the USB TO HOST terminal. · While the computer is connected to the instrument, you should wait for six seconds or more between these operations: (1) when turning the power of the instrument off then on again, or (2) when alternately connecting/disconnecting the USB cable. Operating System (OS) Windows XP SP3 or later (32-bit), Windows Vista (32-bit), Windows 7 (32-bit/64-bit) Mac OS X Version 10. 5. 0 ­ 10. 7. X NOTICE · Never use a computer having a different OS from those above. The Yamaha Standard USB-MIDI driver will support only the above requirements. 1 2 3 Turn off the power of the instrument. Start the computer, then quit any running application software. User Song data can be transferred to the computer as backup, and then returned to the instrument. Style file with the extension " . sty" External Style This refers to Style data which is created on an external device other than your instrument (such as a computer). This refers also to Style data obtainable over the Internet. User Style This refers to Style data which is created via the Recording function of the instrument. User Style data can be transferred to the computer as backup, and then returned to the instrument. Backup file with the extension " . bup" This file which includes the panel settings and performance data can be transferred to the computer and saved as backup. The Backup file on the computer can be returned to the instrument again, allowing you to recall the panel settings and performance data you created previously. Transfer Instrument The items included in the Backup file and data which can be transferred differ depending on the instrument. For details, refer to the end of this manual. NOTICE · If batteries can be installed to the instrument: To avoid power down during data transfer and possible data loss, make sure to use the power adaptor rather than batteries when using the Musicsoft Downloader. NOTE · Make sure to stop playback of the Song or Style when using Musicsoft Downloader, since internal memory of the instrument cannot be accessed from the computer during playback. 7 Transferring MIDI Files including Songs Installing Musicsoft Downloader 1 On the computer, access the following site, then download Musicsoft Downloader. http://download. yamaha. com/ On this site, input the model name then select "Musicsoft Downloader. " Information about the computer system requirements and the latest version of this application can be confirmed there. 2 Execute installation by following the on-screen instructions. After installation is completed, confirm that the Shortcut icon is located on the screen or Musicsoft Downloader is added under Yamaha in the Start menu. For detailed instructions of this application, refer to the Help. 8 Transferring MIDI Files including Songs Transferring MIDI data from the Computer to the Instrument NOTE · Depending on the instrument and the computer OS used, menu and screen indications may differ from those shown in the instructions below. 1 2 Connect the instrument to a computer. On the desktop of the computer, double-click the shortcut icon of Musicsoft Downloader. If you cannot find the shortcut icon, select [Start] [All Programs] [YAMAHA] [Musicsoft Downloader 5] [Musicsoft Downloader]. Musicsoft Downloader launches, and the main window appears. 3 Click [Connection Check] at the bottom of the window. [. . . ] Song files outside " "USER FILES" will be handled as External Songs. · If you wish to transfer Song (***. mid) or Style (***. sty) data to the USB storage device connected to the USB TO DEVICE terminal of the instrument, select "USB. " · If you wish to transfer Backup file (****. bup) data, select "System Drive. " IMPORTANT · Regarding Backup files, User Songs and User Styles created on the instrument, never change the file name on the computer. Doing so makes it impossible to transfer the Backup file to the instrument, and prevents User Song and User Style data from being recognized by the instrument. Click "Electronic Musical Instruments, " then select the desired destination drive. 7 8 Select the file in the upper half box, then click the downward [Move] button. To cancel the operation, click [CANCEL] in this step. Click [OK] to start data transfer from the computer to the instrument. NOTICE · Never unplug the USB cable during data transfer. [. . . ]