User manual YAMAHA DSP-A590

[. . . ] DSP-A590 Natural Sound Digital Sound Field Processing Amplifier Amplificateur de champ sonore numérique de la série "Natural Sound" Natural Sound Digitaler Klangfeldverstärker Digital ljudfältsförstärkare med naturligt ljud Amplificatore digitale a suono naturale per l'elaborazione del campo sonoro Amplificador de procesamiento de campo de sonido digital de Sonido natural Digitale geluidsveldprocessing-versterker met natuurlijke klank OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHORTEILE MEDFOLJANDE TILLBEHOR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES Remote Control Transmitter Emetteur de télécommande Fernbedienungsgeber Fjärrkontrollsändare Telecomando Transmisor del control remoto Afstandbediening q q q q q q q After unpacking, check that the following parts are included. Après le déballage, vérifier que les pièces suivantes sont incluses. Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind. Kontrollera efter det apparaten packats upp att följande delar finns med. [. . . ] (Refer to page 20. ) VIDEO AUX VCR 2 VCR 1 LD/TV * The name of the selected input source will appear in the display. 4 Select the front speakers to be used. SPEAKERS A ON B ON Notes on using the input selector buttons Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel. * To select the source connected to the VIDEO AUX terminals on the front panel, press VIDEO AUX. q The selection of TAPE MONITOR cannot be canceled by pressing another input selector button. When you select a button other than TAPE MONITOR, make sure that TAPE MONITOR is not also selected. q If you select the input selector button for a video source without canceling the selection of TAPE MONITOR, the playback result will be the video image from the video source and the sound from the audio tape. q Once you play a video source, its video image will not be interrupted even if the input selector button for an audio source is selected. q OFF OFF To turn off the power Press the POWER switch again. * If you use two front speaker systems, press both the A and B switches. 15 1, 4 2 TO RECORD A SOURCE TO TAPE (OR DUB FROM TAPE TO TAPE) 1 Select the source to be recorded. TAPE MONITOR TUNER CD PHONO Note DSP, VOLUME, BASS, TREBLE and BALANCE control settings have no effect on the material being recorded. VIDEO AUX VCR 2 VCR 1 LD/TV 2 Play the source and then turn the VOLUME control up to confirm the input source. 3 4 Set the tape deck or VCR to the recording mode. If the tape deck is used for recording, you can monitor the sounds being recorded by pressing TAPE MONITOR. TAPE MONITOR TUNER CD PHONO VIDEO AUX VCR 2 VCR 1 LD/TV 16 English Selecting the SPEAKER system Because one or two speaker systems (as front speakers) can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once. SPEAKERS A ON Adjusting the BASS and TREBLE controls BASS l 2 3 4 5 5 0 l 2 3 4 2 3 4 5 5 TREBLE l 0 l 2 3 4 B ON OFF OFF BASS : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response. Adjusting the BALANCE control Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions. TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response. BALANCE l 2 3 4 L5 0 l 2 3 4 5R Note These controls are effective only for the sound from the front speakers. Note This control is effective only for the sound from the front speakers. When you listen with headphones Connect the headphones to the PHONES jack. You can listen to the sound to be output from the front speakers through headphones. When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position and switch off the digital sound field processor (so that no DSP program name is illuminated on the display) by pressing the EFFECT switch. PHONES 17 USING DIGITAL SOUND FIELD PROCESSOR (DSP) This unit incorporates a sophisticated, multi-program digital sound field processor, which allows you to expand and shape the audio sound field from both the audio and video sources, for a theater-like experience in the listening/viewing room. This digital sound field processor has 8 programs; 6 programs for digital sound field processing and 2 programs for the Dolby Pro Logic Surround sound system (DOLBY PRO LOGIC and DOLBY PRO LOGIC ENHANCED). You can create an excellent audio sound field by selecting the suitable program and adding desired adjustments. In addition, when the DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED program is selected, the built-in automatic input balance control functions. This presents you the best surround condition without manual adjustment. Front Panel Displays your selection on the DSP or other informations. TEST SLEEP DELAY CENTER REAR ms TAPE MONITOR NORMAL WIDEPHANTOM PRO LOGIC CONCERT MONO STADIUM ROCK CONCERT ENHANCED VIDEO MOVIE DISCO CONCERT HALL EFFECT PRO LOGIC ENHANCED CONCERT VIDEO MONO MOVIE STADIUM DISCO ROCK CONCERT CONCERT HALL CENTER MODE DELAY TIME CENTER LEVEL REAR LEVEL Switches on/off the digital sound field processor (DSP) Selects a digital sound field program. (For details, refer to page 13. ) Adjusts sound output level at each speaker. (For details, refer to Adjusts the delay time. page 20 and 21. ) (For details, refer to page 21. ) Remote Control Transmitter POWER SLEEP DISC SKIP PHONO SKIP PAUSE/STOP PLAY CD Used for speaker balance adjustment (For details, refer to page 12, 13 and 14. ) DECK A/B PRESET A/B/C/D/E TUNER REC PAUSE DIR A PLAY DIR B TAPE MON TEST STOP LD/TV Selects a digital sound field program. PRO LOGIC ENHANCED CNCT VIDEO SUR. VCR 1 CENTER LEVEL MONO MOVIE STADIUM DISCO EFFECT ON/OFF VCR 2 Adjusts sound output level at each speaker. (For details, refer to page 20 and 21. ) ROCK HALL V AUX REAR LEVEL DELAY TIME VOLUME Switches on/off the digital sound field processor (DSP). Adjusts the delay time. (For details, refer to page 21. ) 18 English Description of Each Sound Field Program The following list gives brief descriptions of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. The data for them was recorded at the locations described using sophisticated sound field measurement equipment. Note The channel level balance between the left rear effect speaker and the right rear effect speaker may vary depending on the sound field you are listening to. [. . . ] The sound output level to the center speaker is set to 0. The center channel mode is in PHANTOM mode. Incorrect sound field program selection. Turn up the sound output level with the REAR LEVEL control. Select another program suitable for the monaural sound source. [. . . ]