User manual YAMAHA DSP-AZ1

[. . . ] G DSP-AZ1 AV Amplifier Amplificateur Audio-Video VOLUME INPUT SELECTOR INPUT MODE STANDBY /ON SPEAKERS A B SET MENU NEXT 6CH INPUT STEREO PROGRAM EFFECT REC OUT/ZONE 2 BALANCE SOURCE/REMOTE D­TV/LD DVD CABLE SAT VCR 1 MD/TAPE CD­R TUNER CD PHONO BASS TREBLE PROCESSOR BASS DIRECT EXTENSION ON OFF L R VCR 2 VCR 3/DVR VIDEO AUX SILENT VIDEO AUX PHONES S VIDEO VIDEO L AUDIO R OPTICAL OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this unit in a well ventilated, cool, dry, clean place with at least 30 cm on the top, 10 cm on the right and left, and 10 cm at the back of this unit -- away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. [. . . ] 84 E-51 SET MENU ITEMS The SET MENU consists of eighteen items including the Speaker Set, Center Graphic Equalizer and Parameter Initialization features. Choose the appropriate item and adjust or select the values as necessary. Notes · You can adjust the items in the SET MENU while reproducing a source. · We recommend that you adjust the items in the SET MENU while using a video monitor. It is easier to see the video monitor screen than it is to see the front panel display on this unit while adjusting SET MENU items. 1 SPEAKER SET 1A CENTER SP 1B MAIN SP 1C REAR L/R SP 1D REAR CT SP 1E LFE/BASS OUT 1F FRONT EFCT SP 1G MAIN LEVEL 2 LOW FREQ. TEST 3 HP TONE CTRL 4 CENTER GEQ 5 REAR CT GEQ 6 CINEMA EQ 7 INPUT RENAME 8 I/O ASSIGNMENT 9 INPUT MODE 10 PARAMETER INI 11 LFE LEVEL 12 DYNAMIC RANGE 13 SP DELAY 14 AUDIO DELAY 15 DISPLAY SET 16 MEMORY GUARD 17 ZONE2 SET 18 6CH INPUT SET Selects the output mode suitable for your center speaker. Selects the output mode suitable for your main speakers. Selects the output mode suitable for your rear speakers. Selects the output mode suitable for your rear center speaker. Selects the speakers for your LFE/BASS signal output. Selects the output mode for your front effect speakers. Selects the output level for your main channels. Matches the subwoofer level with the level of the other speakers. Adjusts the tonal balance of the headphones. Matches the center speaker tonal quality with the main speakers. Matches the rear center speaker tonal quality with the rear speakers. Adjusts the tonal balance of the main and center speakers, front effect speakers, rear speakers and rear center speaker separately. Assigns the I/O terminals to the designated input sources. Selects the initial input mode of the sources. Initializes the parameters of a group of DSP programs. Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. Adjusts the dynamic range for Dolby Digital signals. Adjusts the delay time for center and rear center speakers. [. . . ] 1 Vp-p/75 PB/CB, PR/CR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 7 Vp-p/75 Maximum Input Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 5 Vp-p Signal to Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 dB or more Frequency Response (MONITOR OUT) VIDEO, S VIDEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]