User manual YAMAHA DTX500

[. . . ] Owner's Manual EN SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc. , is used, please observe all safety markings and instructions that accompany the accessory product. [. . . ] Rotate the jog dial to select the desired function. Pad (trigger input source) to which a pad function is assigned UTIL7~~TMtom1 "Func=clkOn/Off, Function assigned to the pad In the above setting, the click sound can be switched ON/OFF by hitting the tom1 pad which is connected to the 2TOM1/ 0 jack. DTX500 Owner's Manual 21 5 Using the Groove Check Function Another highly useful feature of the DTX500 is the Groove Check function. As you play along with a song or the click, Groove Check compares your timing with the song or click playback and lets you know how accurate your playing is. The related Rhythm Gate function--in which the sound is cancelled if your timing is off--also offers you a great way to improve your technique. Groove Check Mode The Groove Check function has the following two modes. Numeric Display Mode In this mode, the accuracy of your drum hits is shown in numeric display. The aspects shown in the numeric display are the average inaccuracy in the timing of each hit and the deviation in timing inaccuracy of all hits. To use this mode, select one of the modes other than "Challenge" from the Rhythm Gate settings in the GRV2 page. * Hit timing display If your timing is slow or you're dragging the beat, the mark will move to the right side of the display. If your timing is fast or you're pushing the beat, the mark will move to the left. * Rhythm Gate range With the Rhythm Gate function, sound is produced only if the hit is within the specified range, and sound is not produced if the hit is outside this range. The range of Rhythm Gate can be selected from three levels according to the degree of difficulty and if this is set to off, sound is always produced, no matter what your timing is. The selected range is shown in the lower side of the upper half of the display. * Tempo The jog dial can be used to adjust the tempo for the song or click from 30 to 300. * Inaccurate timing display The average inaccuracies in timing as compared to the note value set in page GRV4 are shown in numeric display. Range: 0 (perfectly accurate), 19 (in units of 1/24 of a 16th note) The deviation in timing inaccuracy is 0. 0 to 9. 9. Of course, the smaller this value is, more "in the pocket" your playing is. Your hit Perfect timing of Rhythm Gate according to the result. The tolerance automatically narrows if your hits are accurate and widens if your hits are inaccurate. This mode can be used by selecting "Challenge" from the Rhythm Gate settings in the GRV2 page. * Hit timing display Just as with the Numeric Display mode, your timing is displayed with an icon. * Rhythm gate range The set range of the Rhythm Gate is shown in the lower side of the upper half of the display. After a pad (pads) is hit a specific number of times, the DTX500 evaluates the accuracy of the hits and sets the range of Rhythm Gate automatically. Hit accuracy evaluation In the lower half of the display, the number of remaining hits and the current evaluation result (%) are shown. The current level (evaluation) and the status change during playback. [. . . ] Combo Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDIA Yamaha Music India Pvt. 5F Ambience Corporate Tower Ambience Mall Complex Ambience Island, NH-8, Gurgaon-122001, Haryana, India Tel: 0124-466-5551 CENTRAL & SOUTH AMERICA MEXICO Yamaha de Mxico S. A. 09300, Mxico, D. F. , Mxico Tel: 55-5804-0600 SPAIN/PORTUGAL Yamaha Msica Ibrica, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888 INDONESIA PT. [. . . ]